Color.ToArgb Methode

public:
 int ToArgb();

public int ToArgb();

member this.ToArgb : unit -> int

Public Function ToArgb () As Integer

Retouren

De 32-bits ARGB-waarde hiervan Color.

Voorbeelden

Het volgende codevoorbeeld is ontworpen voor gebruik met Windows Forms en vereist PaintEventArgse, een parameter van de Paint gebeurtenis-handler. De code voert de volgende acties uit:

• Doorloopt de KnownColor opsommingselementen om alle bekende kleuren te vinden die een niet-nulgroene component en een rode component met nulwaarde hebben, en die geen systeemkleuren zijn.

• Tijdens elke iteratie wordt het KnownColor element opgeslagen , als dit overeenkomt met de criteria - in een matrix.

• Gebruikt een penseel om rechthoeken te schilderen.

Elk van de rechthoeken wordt een KnownColor geschilderd die overeenkomt met de criteria die in het eerste opsommingsteken worden vermeld. De naam van de KnownColor en de bijbehorende onderdeelwaarden worden ook weergegeven.

In dit voorbeeld worden bepaalde bekende kleuren, de namen van de kleuren en hun vier onderdeelwaarden weergegeven. De ToArgb methode wordt gebruikt als een voorbereidende stap om de onderdeelwaarden weer te geven.

void ToArgbToStringExample1( PaintEventArgs^ e )
{
   Graphics^ g = e->Graphics;

   // Color structure used for temporary storage.
   Color someColor = Color::FromArgb( 0 );

   // Array to store KnownColor values that match the criteria.
   array<KnownColor>^colorMatches = gcnew array<KnownColor>(167);

   // Number of matches found.
   int count = 0;

   // Iterate through the KnownColor enums to find all corresponding colors
   // that have a nonzero green component and zero-value red component and
   // that are not system colors.
   for ( KnownColor enumValue = (KnownColor)0; enumValue <= KnownColor::YellowGreen; enumValue = enumValue + (KnownColor)1 )
   {
      someColor = Color::FromKnownColor( enumValue );
      if ( someColor.G != 0 && someColor.R == 0 &&  !someColor.IsSystemColor )
               colorMatches[ count++ ] = enumValue;
   }
   SolidBrush^ myBrush1 = gcnew SolidBrush( someColor );
   System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",9 );
   int x = 40;
   int y = 40;

   // Iterate through the matches that were found and display each color that
   // corresponds with the enum value in the array. also display the name of
   // the KnownColor and the ARGB components.
   for ( int i = 0; i < count; i++ )
   {
      // Display the color.
      someColor = Color::FromKnownColor( colorMatches[ i ] );
      myBrush1->Color = someColor;
      g->FillRectangle( myBrush1, x, y, 50, 30 );

      // Display KnownColor name and the four component values. To display the
      // component values:  Use the ToArgb method to get the 32-bit ARGB value
      // of someColor, which was created from a KnownColor. Then create a
      // Color structure from the 32-bit ARGB value and set someColor equal to
      // this new Color structure. Then use the ToString method to convert it to
      // a string.
      g->DrawString( someColor.ToString(), myFont, Brushes::Black, (float)x + 55, (float)y );
      someColor = Color::FromArgb( someColor.ToArgb() );
      g->DrawString( someColor.ToString(), myFont, Brushes::Black, (float)x + 55, (float)y + 15 );
      y += 40;
   }
}

      public void ToArgbToStringExample1(PaintEventArgs e)
      {
          Graphics     g = e.Graphics;
                   
          // Color structure used for temporary storage.
          Color   someColor = Color.FromArgb(0);
                   
          // Array to store KnownColor values that match the criteria.
          KnownColor[]  colorMatches = new KnownColor[167];
          
          // Number of matches found.
          int  count = 0; 

          // Iterate through the KnownColor enums to find all corresponding colors
          // that have a nonzero green component and zero-value red component and
          // that are not system colors.
          for (KnownColor enumValue = 0;
              enumValue <= KnownColor.YellowGreen; enumValue++)
          {
              someColor = Color.FromKnownColor(enumValue);
              if (someColor.G != 0 && someColor.R == 0 && !someColor.IsSystemColor)
                  colorMatches[count++] = enumValue;
          }
          SolidBrush  myBrush1 = new SolidBrush(someColor);
          Font        myFont = new Font("Arial", 9);
          int         x = 40;
          int         y = 40;
                   
          // Iterate through the matches that were found and display each color that
          // corresponds with the enum value in the array. also display the name of
          // the KnownColor and the ARGB components.
          for (int i = 0; i < count; i++)
          {
                   
              // Display the color.
              someColor = Color.FromKnownColor(colorMatches[i]);
              myBrush1.Color = someColor;
              g.FillRectangle(myBrush1, x, y, 50, 30);
                   
              // Display KnownColor name and the four component values. To display the
              // component values:  Use the ToArgb method to get the 32-bit ARGB value
              // of someColor, which was created from a KnownColor. Then create a
              // Color structure from the 32-bit ARGB value and set someColor equal to
              // this new Color structure. Then use the ToString method to convert it to
              // a string.
              g.DrawString(someColor.ToString(), myFont, Brushes.Black, x + 55, y);
              someColor = Color.FromArgb(someColor.ToArgb());
              g.DrawString(someColor.ToString(), myFont, Brushes.Black, x + 55, y + 15);
              y += 40;
          }
      }

Public Sub ToArgbToStringExample1(ByVal e As PaintEventArgs)
    Dim g As Graphics = e.Graphics

    ' Color structure used for temporary storage.
    Dim someColor As Color = Color.FromArgb(0)

    ' Array to store KnownColor values that match the criteria.
    Dim colorMatches(167) As KnownColor

    ' Number of matches found.
    Dim count As Integer = 0

    ' Iterate through KnownColor enums to find all corresponding colors
    ' that have a non-zero green component and zero-valued red
    ' component and that are not system colors.
    Dim enumValue As KnownColor
    For enumValue = 0 To KnownColor.YellowGreen
        someColor = Color.FromKnownColor(enumValue)
        If someColor.G <> 0 And someColor.R = 0 And _
        Not someColor.IsSystemColor Then
            colorMatches(count) = enumValue
            count += 1
        End If
    Next enumValue
    Dim myBrush1 As New SolidBrush(someColor)
    Dim myFont As New Font("Arial", 9)
    Dim x As Integer = 40
    Dim y As Integer = 40

    ' Iterate through the matches found and display each color that
    ' corresponds with the enum value in the array. Also display the
    ' name of the KnownColor and the ARGB components.
    Dim i As Integer
    For i = 0 To count - 1

        ' Display the color.
        someColor = Color.FromKnownColor(colorMatches(i))
        myBrush1.Color = someColor
        g.FillRectangle(myBrush1, x, y, 50, 30)

        ' Display KnownColor name and four component values. To display
        ' component values:  Use the ToArgb method to get the 32-bit
        ' ARGB value of someColor (created from a KnownColor). Create
        ' a Color structure from the 32-bit ARGB value and set someColor
        ' equal to this new Color structure. Then use the ToString method
        ' to convert it to a string.
        g.DrawString(someColor.ToString(), myFont, Brushes.Black, _
        x + 55, y)
        someColor = Color.FromArgb(someColor.ToArgb())
        g.DrawString(someColor.ToString(), myFont, Brushes.Black, _
        x + 55, y + 15)
        y += 40
    Next i
End Sub

Opmerkingen

De bytevolgorde van de 32-bits ARGB-waarde is AARRGGBB. De belangrijkste byte (MSB), vertegenwoordigd door AA, is de alfacomponentwaarde. De tweede, derde en vierde bytes, vertegenwoordigd door respectievelijk RR, GG en BB, zijn de kleurcomponenten rood, groen en blauw, respectievelijk