Module.ResolveMethod メソッド

public:
 System::Reflection::MethodBase ^ ResolveMethod(int metadataToken, cli::array <Type ^> ^ genericTypeArguments, cli::array <Type ^> ^ genericMethodArguments);

public:
 virtual System::Reflection::MethodBase ^ ResolveMethod(int metadataToken, cli::array <Type ^> ^ genericTypeArguments, cli::array <Type ^> ^ genericMethodArguments);

public System.Reflection.MethodBase ResolveMethod(int metadataToken, Type[] genericTypeArguments, Type[] genericMethodArguments);

public virtual System.Reflection.MethodBase ResolveMethod(int metadataToken, Type[] genericTypeArguments, Type[] genericMethodArguments);

member this.ResolveMethod : int * Type[] * Type[] -> System.Reflection.MethodBase

abstract member ResolveMethod : int * Type[] * Type[] -> System.Reflection.MethodBase
override this.ResolveMethod : int * Type[] * Type[] -> System.Reflection.MethodBase

Public Function ResolveMethod (metadataToken As Integer, genericTypeArguments As Type(), genericMethodArguments As Type()) As MethodBase

Public Overridable Function ResolveMethod (metadataToken As Integer, genericTypeArguments As Type(), genericMethodArguments As Type()) As MethodBase

パラメーター

返品

指定したメタデータ トークンによって識別されるメソッドを表す MethodBase オブジェクト。

例外

例

次の例では、 ResolveMethod メソッドの 2 つのオーバーロードを使用して、ジェネリック コンテキストと非ジェネリック コンテキストの呼び出しサイトからメタデータ トークンを解決する方法を示します。

このコード例では、 G1<Tg1> と G2<Tg2>の 2 つのジェネリック型を定義します。それぞれにジェネリック メソッドがあります。 G1<Tg1> には、パラメーターに Tg1 型パラメーターを使用する非ジェネリック メソッドもあります。 G2<Tg2>型のジェネリック メソッドGM2<Tgm2>には、いくつかのメソッド呼び出しが含まれています。

• ケース 1: G2<Tg2>の型パラメーターとGM2<Tgm2>を型引数として使用して、GM1<Tgm1>ジェネリック メソッドが呼び出されます。 つまり、呼び出されたメソッドのパラメーター型は、 G2<Tg2>の型定義から閉じたジェネリック型を構築するために使用される型によって異なります。

• ケース 2: M1 非ジェネリック メソッドが呼び出されます。 このメソッドのパラメーターは、定義する型の型パラメーター G1<Tg1>を使用します。このパラメーターは、この場合、外側の型の型パラメーター G2<Tg2>に置き換えられます。

• ケース 3: ジェネリックメソッド GM1<Tgm1> が呼び出され、ジェネリック型の型引数とジェネリック メソッドの Int32 と Object をそれぞれ指定します。 このメソッド呼び出しは、外側の型またはメソッドの型パラメーターに依存しません。

• ケース 4: Example クラスの非ジェネリック メソッドM1が呼び出されます。 このメソッド呼び出しは、外側の型またはメソッドの型パラメーターに依存しません。

さらに、この例では非ジェネリック Example クラスを定義します。 このクラスには、ジェネリック メソッドの呼び出しを行うメソッド M があります。

• ケース 5: ジェネリックメソッド GM1<Tgm1> が呼び出され、ジェネリック型の型引数とジェネリック メソッドの Int32 と Object をそれぞれ指定します。 このメソッドのコンテキストには、ジェネリック型またはジェネリック メソッドを囲む必要はありません。

各ケースについて、最初に呼び出されたメソッドを表すMethodInfoを構築し、次に、Type.GetGenericArgumentsメソッドとMethodInfo.GetGenericArguments メソッドを使用してResolveMethod(Int32, Type[], Type[]) メソッド オーバーロードを使用してトークンを解決し、genericTypeArgumentsパラメーターとgenericMethodArguments パラメーターの値を取得します。 メソッドは非ジェネリック コンテキストの Type.EmptyTypes を返すので、この手法はすべてのケースで機能します。 この例では、解決された MethodInfo を構築された MethodInfoと比較します。

次に、 ResolveMethod(Int32) メソッドのオーバーロードを使用してトークンを解決します。 これは、メソッド呼び出しがジェネリック コンテキストに依存しないため、ケース 3、4、5 で機能します。 ケース 1 と 2 では、トークンを解決するための情報が不足しているため、例外がスローされます。

メタデータ トークンの値は、列挙型としてハードコーディングされます。 このコード例を変更すると、トークン値が変更される可能性があります。 新しいトークン値を確認するには、コードをコンパイルし、 /TOKENS オプションで Ildasm.exe を使用してアセンブリを調べます。 トークンは呼び出しの時点で見つけることができます。 新しい値を列挙に挿入し、例を再コンパイルします。

using System;
using System.Reflection;

namespace ResolveMethodExample
{
    // Metadata tokens for the MethodRefs that are to be resolved.
    // If you change this program, some or all of these metadata tokens might
    // change. The new token values can be discovered by compiling the example
    // and examining the assembly with Ildasm.exe, using the /TOKENS option.
    // Recompile the program after correcting the token values.
    enum Tokens
    {
        Case1 = 0x2b000001,
        Case2 = 0x0A000006,
        Case3 = 0x2b000002,
        Case4 = 0x06000006,
        Case5 = 0x2b000002
    }

    class G1<Tg1>
    {
        public void GM1<Tgm1> (Tg1 param1, Tgm1 param2) {}
        public void M1(Tg1 param) {}
    }

    class G2<Tg2>
    {
        public void GM2<Tgm2> (Tg2 param1, Tgm2 param2)
        {
            // Case 1: A generic method call that depends on its generic
            // context, because it uses the type parameters of the enclosing
            // generic type G2 and the enclosing generic method GM2. The token
            // for the MethodSpec is Tokens.Case1.
            G1<Tg2> g = new G1<Tg2>();
            g.GM1<Tgm2>(param1, param2);

            // Case 2: A non-generic method call that depends on its generic
            // context, because it uses the type parameter of the enclosing
            // generic type G2. The token for the MemberRef is Tokens.Case2.
            g.M1(param1);

            // Case 3: A generic method call that does not depend on its generic
            // context, because it does not use type parameters of the enclosing
            // generic type or method. The token for the MethodSpec is Tokens.Case3.
            G1<int> gi = new G1<int>();
            gi.GM1<object>(42, new Object());

            // Case 4: A non-generic method call that does not depend on its
            // generic context, because it does not use the type parameters of the
            // enclosing generic type or method. The token for the MethodDef is
            // Tokens.Case4.
            Example e = new Example();
            e.M();
        }
    }

    class Example
    {
        public void M()
        {
            G1<int> g = new G1<int>();
            // Case 5: A generic method call that does not have any generic
            // context. The token for the MethodSpec is Tokens.Case5.
            g.GM1<object>(42, new Object());
        }

        static void Main ()
        {
            Module mod = typeof(Example).Assembly.ManifestModule;
            MethodInfo miResolved2 = null;

            // Case 1: A generic method call that is dependent on its generic context.
            //
            // Create and display a MethodInfo representing the MethodSpec of the
            // generic method g.GM1<Tgm2>() that is called in G2<Tg2>.GM2<Tgm2>().
            Type t = typeof(G1<>).MakeGenericType(typeof(G2<>).GetGenericArguments());
            MethodInfo mi = typeof(G2<>).GetMethod("GM2");
            MethodInfo miTest = t.GetMethod("GM1").MakeGenericMethod(mi.GetGenericArguments());
            Console.WriteLine("\nCase 1:\n{0}", miTest);

            // Resolve the MethodSpec token for method G1<Tg2>.GM1<Tgm2>(), which
            // is called in method G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method
            // must be used to obtain the context for resolving the method.
            MethodInfo miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case1,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The overload that doesn't specify generic context throws an exception
            // because there is insufficient context to resolve the token.
            try
            {
                miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case1);
            }
            catch (Exception ex)
            {
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message);
            }

            // Case 2: A non-generic method call that is dependent on its generic context.
            //
            // Create and display a MethodInfo representing the MemberRef of the
            // non-generic method g.M1() that is called in G2<Tg2>.GM2<Tgm2>().
            t = typeof(G1<>).MakeGenericType(typeof(G2<>).GetGenericArguments());
            miTest = t.GetMethod("M1");
            Console.WriteLine("\nCase 2:\n{0}", miTest);

            // Resolve the MemberRef token for method G1<Tg2>.M1(), which is
            // called in method G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method
            // must be used to obtain the context for resolving the method, because
            // the method parameter comes from the generic type G1, and the type
            // argument, Tg2, comes from the generic type that encloses the call.
            // There is no enclosing generic method, so the value Type.EmptyTypes
            // could be passed for the genericMethodArguments parameter.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case2,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The overload that doesn't specify generic context throws an exception
            // because there is insufficient context to resolve the token.
            try
            {
                miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case2);
            }
            catch (Exception ex)
            {
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message);
            }

            // Case 3: A generic method call that is independent of its generic context.
            //
            // Create and display a MethodInfo representing the MethodSpec of the
            // generic method gi.GM1<object>() that is called in G2<Tg2>.GM2<Tgm2>().
            mi = typeof(G1<int>).GetMethod("GM1");
            miTest = mi.MakeGenericMethod(new Type[] { typeof(object) });
            Console.WriteLine("\nCase 3:\n{0}", miTest);

            // Resolve the token for method G1<int>.GM1<object>(), which is called
            // in G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the method call in
            // this case does not use type parameters of the enclosing type or
            // method, so Type.EmptyTypes could be used for both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case3,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on the enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case3);

            // Case 4: A non-generic method call that is independent of its generic context.
            //
            // Create and display a MethodInfo representing the MethodDef of the
            // method e.M() that is called in G2<Tg2>.GM2<Tgm2>().
            miTest = typeof(Example).GetMethod("M");
            Console.WriteLine("\nCase 4:\n{0}", miTest);

            // Resolve the token for method Example.M(), which is called in
            // G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the non-generic
            // method call does not use type parameters of the enclosing type or
            // method, so Type.EmptyTypes could be used for both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case4,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on any enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case4);

            // Case 5: Generic method call in a non-generic context.
            //
            // Create and display a MethodInfo representing the MethodRef of the
            // closed generic method g.GM1<object>() that is called in Example.M().
            mi = typeof(G1<int>).GetMethod("GM1");
            miTest = mi.MakeGenericMethod(new Type[] { typeof(object) });
            Console.WriteLine("\nCase 5:\n{0}", miTest);

            // Resolve the token for method G1<int>.GM1<object>(), which is called
            // in method Example.M(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the enclosing type
            // and method are not generic, so Type.EmptyTypes could be used for
            // both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case5,
                typeof(Example).GetGenericArguments(),
                typeof(Example).GetMethod("M").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on any enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case5);
        }
    }
}
/* This example produces the following output:

Case 1:
Void GM1[Tgm2](Tg2, Tgm2)
Void GM1[Tgm2](Tg2, Tgm2)
Is the resolved method the same? True
System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.

Case 2:
Void M1(Tg2)
Void M1(Tg2)
Is the resolved method the same? True
System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.

Case 3:
Void GM1[Object](Int32, System.Object)
Void GM1[Object](Int32, System.Object)
Is the resolved method the same? True

Case 4:
Void M()
Void M()
Is the resolved method the same? True

Case 5:
Void GM1[Object](Int32, System.Object)
Void GM1[Object](Int32, System.Object)
Is the resolved method the same? True
 */

Imports System.Reflection

Namespace ResolveMethodExample

    ' Metadata tokens for the MethodRefs that are to be resolved.
    ' If you change this program, some or all of these metadata tokens might
    ' change. The new token values can be discovered by compiling the example
    ' and examining the assembly with Ildasm.exe, using the /TOKENS option. 
    ' Recompile the program after correcting the token values. 
    Enum Tokens
        Case1 = &H2B000003
        Case2 = &HA00001F
        Case3 = &H2B000004
        Case4 = &H6000017
        Case5 = &H2B000004
    End Enum 


    Class G1(Of Tg1)

        Public Sub GM1(Of Tgm1) (ByVal param1 As Tg1, ByVal param2 As Tgm1)
        End Sub

        Public Sub M1(ByVal param As Tg1)
        End Sub
    End Class

    Class G2(Of Tg2)
    
        Public Sub GM2(Of Tgm2) (ByVal param1 As Tg2, ByVal param2 As Tgm2)
        
            ' Case 1: A generic method call that depends on its generic 
            ' context, because it uses the type parameters of the enclosing
            ' generic type G2 and the enclosing generic method GM2. The token 
            ' for the MethodSpec is Tokens.Case1.
            Dim g As New G1(Of Tg2)()
            g.GM1(Of Tgm2)(param1, param2)

            ' Case 2: A non-generic method call that depends on its generic 
            ' context, because it uses the type parameter of the enclosing
            ' generic type G2. The token for the MemberRef is Tokens.Case2.
            g.M1(param1)

            ' Case 3: A generic method call that does not depend on its generic 
            ' context, because it does not use type parameters of the enclosing
            ' generic type or method. The token for the MethodSpec is Tokens.Case3.
            Dim gi As New G1(Of Integer)()
            gi.GM1(Of Object)(42, New Object())

            ' Case 4: A non-generic method call that does not depend on its 
            ' generic context, because it does not use the type parameters of the
            ' enclosing generic type or method. The token for the MethodDef is 
            ' Tokens.Case4.
            Dim e As New Example()
            e.M()
        End Sub 
    End Class

    Class Example
        Public Sub M() 
            Dim g As New G1(Of Integer)()
            ' Case 5: A generic method call that does not have any generic 
            ' context. The token for the MethodSpec is Tokens.Case5.
            g.GM1(Of Object)(42, New Object())
        End Sub 
    
        Shared Sub Main() 
            Dim m As [Module] = GetType(Example).Assembly.ManifestModule
            Dim miResolved2 As MethodInfo = Nothing
        
            ' Case 1: A generic method call that is dependent on its generic context.
            '
            ' Create and display a MethodInfo representing the MethodSpec of the 
            ' generic method g.GM1(Of Tgm2)() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            Dim t As Type = GetType(G1(Of )).MakeGenericType(GetType(G2(Of )).GetGenericArguments())
            Dim mi As MethodInfo = GetType(G2(Of )).GetMethod("GM2")
            Dim miTest As MethodInfo = t.GetMethod("GM1").MakeGenericMethod(mi.GetGenericArguments())
            Console.WriteLine(vbCrLf & "Case 1:" & vbCrLf & miTest.ToString())
        
            ' Resolve the MethodSpec token for method G1(Of Tg2).GM1(Of Tgm2)(), which 
            ' is called in method G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments 
            ' method must be used to obtain the context for resolving the method.
            Dim miResolved As MethodInfo = CType(m.ResolveMethod( _
                    CInt(Tokens.Case1), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The overload that doesn't specify generic context throws an exception
            ' because there is insufficient context to resolve the token.
            Try
                miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case1)), MethodInfo)
            Catch ex As Exception
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message)
            End Try
        
        
            ' Case 2: A non-generic method call that is dependent on its generic context.
            '
            ' Create and display a MethodInfo representing the MemberRef of the 
            ' non-generic method g.M1() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            t = GetType(G1(Of )).MakeGenericType(GetType(G2(Of )).GetGenericArguments())
            miTest = t.GetMethod("M1")
            Console.WriteLine(vbCrLf & "Case 2:" & vbCrLf & miTest.ToString())
        
            ' Resolve the MemberRef token for method G1(Of Tg2).M1(), which is
            ' called in method G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments 
            ' method must be used to obtain the context for resolving the method, 
            ' because the method parameter comes from the generic type G1, and the 
            ' because argument, Tg2, comes from the generic type that encloses the 
            ' call. There is no enclosing generic method, so Type.EmptyTypes could
            ' be passed for the genericMethodArguments parameter.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case2), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The overload that doesn't specify generic context throws an exception
            ' because there is insufficient context to resolve the token.
            Try
                miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case2)), MethodInfo)
            Catch ex As Exception
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message)
            End Try
        
        
            ' Case 3: A generic method call that is independent of its generic context.
            '
            ' Create and display a MethodInfo representing the MethodSpec of the 
            ' generic method gi.GM1(Of Object)() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            mi = GetType(G1(Of Integer)).GetMethod("GM1")
            miTest = mi.MakeGenericMethod(New Type() {GetType(Object)})
            Console.WriteLine(vbCrLf & "Case 3:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method G1(Of Integer).GM1(Of Object)(), which is 
            ' calledin G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments method is  
            ' used to obtain the context for resolving the method, but the method call
            ' in this case does not use type parameters of the enclosing type or
            ' method, so Type.EmptyTypes could be used for both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case3), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on the enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case3)), MethodInfo)
        
        
            ' Case 4: A non-generic method call that is independent of its generic context.
            '
            ' Create and display a MethodInfo representing the MethodDef of the 
            ' method e.M() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            miTest = GetType(Example).GetMethod("M")
            Console.WriteLine(vbCrLf & "Case 4:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method Example.M(), which is called in
            ' G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments method is used to 
            ' obtain the context for resolving the method, but the non-generic 
            ' method call does not use type parameters of the enclosing type or
            ' method, so Type.EmptyTypes could be used for both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case4), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on any enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case4)), MethodInfo)
        
        
            ' Case 5: Generic method call in a non-generic context.
            '
            ' Create and display a MethodInfo representing the MethodRef of the 
            ' closed generic method g.GM1(Of Object)() that is called in Example.M().
            mi = GetType(G1(Of Integer)).GetMethod("GM1")
            miTest = mi.MakeGenericMethod(New Type() {GetType(Object)})
            Console.WriteLine(vbCrLf & "Case 5:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method G1(Of Integer).GM1(Of Object)(), which is 
            ' called in method Example.M(). The GetGenericArguments method is used to 
            ' obtain the context for resolving the method, but the enclosing type
            ' and method are not generic, so Type.EmptyTypes could be used for
            ' both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case5), _
                    GetType(Example).GetGenericArguments(), _
                    GetType(Example).GetMethod("M").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on any enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case5)), MethodInfo)
    
        End Sub 
    End Class 
End Namespace

' This example produces the following output:
'
'Case 1:
'Void GM1[Tgm2](Tg2, Tgm2)
'Void GM1[Tgm2](Tg2, Tgm2)
'Is the resolved method the same? True
'System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.
'
'Case 2:
'Void M1(Tg2)
'Void M1(Tg2)
'Is the resolved method the same? True
'System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.
'
'Case 3:
'Void GM1[Object](Int32, System.Object)
'Void GM1[Object](Int32, System.Object)
'Is the resolved method the same? True
'
'Case 4:
'Void M()
'Void M()
'Is the resolved method the same? True
'
'Case 5:
'Void GM1[Object](Int32, System.Object)
'Void GM1[Object](Int32, System.Object)
'Is the resolved method the same? True
'

注釈

metadataTokenがスコープ内にある型に対してType.GetGenericArguments メソッドを使用して、genericTypeArgumentsのジェネリック型引数の配列を取得します。 metadataTokenがスコープ内にあるメソッドで MethodInfo.GetGenericArguments メソッドを使用して、genericMethodArgumentsのジェネリック型引数の配列を取得します。 これらの引数は、必要ない場合でも、常に安全に指定できます。

public:
 System::Reflection::MethodBase ^ ResolveMethod(int metadataToken);

public System.Reflection.MethodBase ResolveMethod(int metadataToken);

member this.ResolveMethod : int -> System.Reflection.MethodBase

Public Function ResolveMethod (metadataToken As Integer) As MethodBase

パラメーター

返品

指定したメタデータ トークンによって識別されるメソッドまたはコンストラクターを表す MethodBase オブジェクト。

例外

例

次の例では、 ResolveMethod メソッドの 2 つのオーバーロードを使用して、ジェネリック コンテキストと非ジェネリック コンテキストの呼び出しサイトからメタデータ トークンを解決する方法を示します。

このコード例では、G1<Tg1> と G2<Tg2> (Visual Basic では G1(Of Tg1) と G2(Of Tg2)) の 2 つのジェネリック型を定義します。それぞれにジェネリック メソッドがあります。 G1<Tg1> には、パラメーターに Tg1 型パラメーターを使用する非ジェネリック メソッドもあります。 G2<Tg2>型のジェネリック メソッドGM2<Tgm2>には、いくつかのメソッド呼び出しが含まれています。

• ケース 1: G2<Tg2>の型パラメーターとGM2<Tgm2>を型引数として使用して、GM1<Tgm1>ジェネリック メソッドが呼び出されます。 つまり、呼び出されたメソッドのパラメーター型は、 G2<Tg2>の型定義から閉じたジェネリック型を構築するために使用される型によって異なります。

• ケース 2: M1 非ジェネリック メソッドが呼び出されます。 このメソッドのパラメーターは、定義する型の型パラメーター G1<Tg1>を使用します。このパラメーターは、この場合、外側の型の型パラメーター G2<Tg2>に置き換えられます。

• ケース 3: ジェネリックメソッド GM1<Tgm1> が呼び出され、ジェネリック型の型引数とジェネリック メソッドの Int32 と Object をそれぞれ指定します。 このメソッド呼び出しは、外側の型またはメソッドの型パラメーターに依存しません。

• ケース 4: Example クラスの非ジェネリック メソッドM1が呼び出されます。 このメソッド呼び出しは、外側の型またはメソッドの型パラメーターに依存しません。

さらに、この例では非ジェネリック Example クラスを定義します。 このクラスには、ジェネリック メソッドを呼び出すメソッド M があります。

• ケース 5: ジェネリックメソッド GM1 が呼び出され、ジェネリック型の型引数とジェネリック メソッドの Int32 と Object をそれぞれ指定します。 このメソッドのコンテキストには、ジェネリック型またはジェネリック メソッドを囲む必要はありません。

各ケースについて、最初に呼び出されたメソッドを表すMethodInfoを構築し、次に、Type.GetGenericArgumentsメソッドとMethodInfo.GetGenericArguments メソッドを使用してResolveMethod(Int32, Type[], Type[]) メソッド オーバーロードを使用してトークンを解決し、genericTypeArgumentsパラメーターとgenericMethodArguments パラメーターの値を取得します。 メソッドは非ジェネリック コンテキストの Type.EmptyTypes を返すので、この手法はすべてのケースで機能します。 この例では、解決された MethodInfo を構築された MethodInfoと比較します。

次に、 ResolveMethod(Int32) メソッドのオーバーロードを使用してトークンを解決します。 これは、メソッド呼び出しがジェネリック コンテキストに依存しないため、ケース 3、4、5 で機能します。 ケース 1 と 2 では、トークンを解決するための情報が不足しているため、例外がスローされます。

メタデータ トークンの値は、列挙型としてハードコーディングされます。 このコード例を変更すると、トークン値が変更される可能性があります。 新しいトークン値を確認するには、コードをコンパイルし、 /TOKENS オプションで Ildasm.exe を使用してアセンブリを調べます。 トークンは呼び出しの時点で見つけることができます。 新しい値を列挙に挿入し、例を再コンパイルします。

using System;
using System.Reflection;

namespace ResolveMethodExample
{
    // Metadata tokens for the MethodRefs that are to be resolved.
    // If you change this program, some or all of these metadata tokens might
    // change. The new token values can be discovered by compiling the example
    // and examining the assembly with Ildasm.exe, using the /TOKENS option.
    // Recompile the program after correcting the token values.
    enum Tokens
    {
        Case1 = 0x2b000001,
        Case2 = 0x0A000006,
        Case3 = 0x2b000002,
        Case4 = 0x06000006,
        Case5 = 0x2b000002
    }

    class G1<Tg1>
    {
        public void GM1<Tgm1> (Tg1 param1, Tgm1 param2) {}
        public void M1(Tg1 param) {}
    }

    class G2<Tg2>
    {
        public void GM2<Tgm2> (Tg2 param1, Tgm2 param2)
        {
            // Case 1: A generic method call that depends on its generic
            // context, because it uses the type parameters of the enclosing
            // generic type G2 and the enclosing generic method GM2. The token
            // for the MethodSpec is Tokens.Case1.
            G1<Tg2> g = new G1<Tg2>();
            g.GM1<Tgm2>(param1, param2);

            // Case 2: A non-generic method call that depends on its generic
            // context, because it uses the type parameter of the enclosing
            // generic type G2. The token for the MemberRef is Tokens.Case2.
            g.M1(param1);

            // Case 3: A generic method call that does not depend on its generic
            // context, because it does not use type parameters of the enclosing
            // generic type or method. The token for the MethodSpec is Tokens.Case3.
            G1<int> gi = new G1<int>();
            gi.GM1<object>(42, new Object());

            // Case 4: A non-generic method call that does not depend on its
            // generic context, because it does not use the type parameters of the
            // enclosing generic type or method. The token for the MethodDef is
            // Tokens.Case4.
            Example e = new Example();
            e.M();
        }
    }

    class Example
    {
        public void M()
        {
            G1<int> g = new G1<int>();
            // Case 5: A generic method call that does not have any generic
            // context. The token for the MethodSpec is Tokens.Case5.
            g.GM1<object>(42, new Object());
        }

        static void Main ()
        {
            Module mod = typeof(Example).Assembly.ManifestModule;
            MethodInfo miResolved2 = null;

            // Case 1: A generic method call that is dependent on its generic context.
            //
            // Create and display a MethodInfo representing the MethodSpec of the
            // generic method g.GM1<Tgm2>() that is called in G2<Tg2>.GM2<Tgm2>().
            Type t = typeof(G1<>).MakeGenericType(typeof(G2<>).GetGenericArguments());
            MethodInfo mi = typeof(G2<>).GetMethod("GM2");
            MethodInfo miTest = t.GetMethod("GM1").MakeGenericMethod(mi.GetGenericArguments());
            Console.WriteLine("\nCase 1:\n{0}", miTest);

            // Resolve the MethodSpec token for method G1<Tg2>.GM1<Tgm2>(), which
            // is called in method G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method
            // must be used to obtain the context for resolving the method.
            MethodInfo miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case1,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The overload that doesn't specify generic context throws an exception
            // because there is insufficient context to resolve the token.
            try
            {
                miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case1);
            }
            catch (Exception ex)
            {
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message);
            }

            // Case 2: A non-generic method call that is dependent on its generic context.
            //
            // Create and display a MethodInfo representing the MemberRef of the
            // non-generic method g.M1() that is called in G2<Tg2>.GM2<Tgm2>().
            t = typeof(G1<>).MakeGenericType(typeof(G2<>).GetGenericArguments());
            miTest = t.GetMethod("M1");
            Console.WriteLine("\nCase 2:\n{0}", miTest);

            // Resolve the MemberRef token for method G1<Tg2>.M1(), which is
            // called in method G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method
            // must be used to obtain the context for resolving the method, because
            // the method parameter comes from the generic type G1, and the type
            // argument, Tg2, comes from the generic type that encloses the call.
            // There is no enclosing generic method, so the value Type.EmptyTypes
            // could be passed for the genericMethodArguments parameter.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case2,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The overload that doesn't specify generic context throws an exception
            // because there is insufficient context to resolve the token.
            try
            {
                miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case2);
            }
            catch (Exception ex)
            {
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message);
            }

            // Case 3: A generic method call that is independent of its generic context.
            //
            // Create and display a MethodInfo representing the MethodSpec of the
            // generic method gi.GM1<object>() that is called in G2<Tg2>.GM2<Tgm2>().
            mi = typeof(G1<int>).GetMethod("GM1");
            miTest = mi.MakeGenericMethod(new Type[] { typeof(object) });
            Console.WriteLine("\nCase 3:\n{0}", miTest);

            // Resolve the token for method G1<int>.GM1<object>(), which is called
            // in G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the method call in
            // this case does not use type parameters of the enclosing type or
            // method, so Type.EmptyTypes could be used for both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case3,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on the enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case3);

            // Case 4: A non-generic method call that is independent of its generic context.
            //
            // Create and display a MethodInfo representing the MethodDef of the
            // method e.M() that is called in G2<Tg2>.GM2<Tgm2>().
            miTest = typeof(Example).GetMethod("M");
            Console.WriteLine("\nCase 4:\n{0}", miTest);

            // Resolve the token for method Example.M(), which is called in
            // G2<Tg2>.GM2<Tgm2>(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the non-generic
            // method call does not use type parameters of the enclosing type or
            // method, so Type.EmptyTypes could be used for both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case4,
                typeof(G2<>).GetGenericArguments(),
                typeof(G2<>).GetMethod("GM2").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on any enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case4);

            // Case 5: Generic method call in a non-generic context.
            //
            // Create and display a MethodInfo representing the MethodRef of the
            // closed generic method g.GM1<object>() that is called in Example.M().
            mi = typeof(G1<int>).GetMethod("GM1");
            miTest = mi.MakeGenericMethod(new Type[] { typeof(object) });
            Console.WriteLine("\nCase 5:\n{0}", miTest);

            // Resolve the token for method G1<int>.GM1<object>(), which is called
            // in method Example.M(). The GetGenericArguments method is used to
            // obtain the context for resolving the method, but the enclosing type
            // and method are not generic, so Type.EmptyTypes could be used for
            // both arguments.
            miResolved = (MethodInfo) mod.ResolveMethod(
                (int)Tokens.Case5,
                typeof(Example).GetGenericArguments(),
                typeof(Example).GetMethod("M").GetGenericArguments());
            Console.WriteLine(miResolved);
            Console.WriteLine("Is the resolved method the same? {0}", miResolved == miTest);

            // The method call in this case does not depend on any enclosing generic
            // context, so the token can also be resolved by the simpler overload.
            miResolved2 = (MethodInfo) mod.ResolveMethod((int)Tokens.Case5);
        }
    }
}
/* This example produces the following output:

Case 1:
Void GM1[Tgm2](Tg2, Tgm2)
Void GM1[Tgm2](Tg2, Tgm2)
Is the resolved method the same? True
System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.

Case 2:
Void M1(Tg2)
Void M1(Tg2)
Is the resolved method the same? True
System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.

Case 3:
Void GM1[Object](Int32, System.Object)
Void GM1[Object](Int32, System.Object)
Is the resolved method the same? True

Case 4:
Void M()
Void M()
Is the resolved method the same? True

Case 5:
Void GM1[Object](Int32, System.Object)
Void GM1[Object](Int32, System.Object)
Is the resolved method the same? True
 */

Imports System.Reflection

Namespace ResolveMethodExample

    ' Metadata tokens for the MethodRefs that are to be resolved.
    ' If you change this program, some or all of these metadata tokens might
    ' change. The new token values can be discovered by compiling the example
    ' and examining the assembly with Ildasm.exe, using the /TOKENS option. 
    ' Recompile the program after correcting the token values. 
    Enum Tokens
        Case1 = &H2B000003
        Case2 = &HA00001F
        Case3 = &H2B000004
        Case4 = &H6000017
        Case5 = &H2B000004
    End Enum 


    Class G1(Of Tg1)

        Public Sub GM1(Of Tgm1) (ByVal param1 As Tg1, ByVal param2 As Tgm1)
        End Sub

        Public Sub M1(ByVal param As Tg1)
        End Sub
    End Class

    Class G2(Of Tg2)
    
        Public Sub GM2(Of Tgm2) (ByVal param1 As Tg2, ByVal param2 As Tgm2)
        
            ' Case 1: A generic method call that depends on its generic 
            ' context, because it uses the type parameters of the enclosing
            ' generic type G2 and the enclosing generic method GM2. The token 
            ' for the MethodSpec is Tokens.Case1.
            Dim g As New G1(Of Tg2)()
            g.GM1(Of Tgm2)(param1, param2)

            ' Case 2: A non-generic method call that depends on its generic 
            ' context, because it uses the type parameter of the enclosing
            ' generic type G2. The token for the MemberRef is Tokens.Case2.
            g.M1(param1)

            ' Case 3: A generic method call that does not depend on its generic 
            ' context, because it does not use type parameters of the enclosing
            ' generic type or method. The token for the MethodSpec is Tokens.Case3.
            Dim gi As New G1(Of Integer)()
            gi.GM1(Of Object)(42, New Object())

            ' Case 4: A non-generic method call that does not depend on its 
            ' generic context, because it does not use the type parameters of the
            ' enclosing generic type or method. The token for the MethodDef is 
            ' Tokens.Case4.
            Dim e As New Example()
            e.M()
        End Sub 
    End Class

    Class Example
        Public Sub M() 
            Dim g As New G1(Of Integer)()
            ' Case 5: A generic method call that does not have any generic 
            ' context. The token for the MethodSpec is Tokens.Case5.
            g.GM1(Of Object)(42, New Object())
        End Sub 
    
        Shared Sub Main() 
            Dim m As [Module] = GetType(Example).Assembly.ManifestModule
            Dim miResolved2 As MethodInfo = Nothing
        
            ' Case 1: A generic method call that is dependent on its generic context.
            '
            ' Create and display a MethodInfo representing the MethodSpec of the 
            ' generic method g.GM1(Of Tgm2)() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            Dim t As Type = GetType(G1(Of )).MakeGenericType(GetType(G2(Of )).GetGenericArguments())
            Dim mi As MethodInfo = GetType(G2(Of )).GetMethod("GM2")
            Dim miTest As MethodInfo = t.GetMethod("GM1").MakeGenericMethod(mi.GetGenericArguments())
            Console.WriteLine(vbCrLf & "Case 1:" & vbCrLf & miTest.ToString())
        
            ' Resolve the MethodSpec token for method G1(Of Tg2).GM1(Of Tgm2)(), which 
            ' is called in method G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments 
            ' method must be used to obtain the context for resolving the method.
            Dim miResolved As MethodInfo = CType(m.ResolveMethod( _
                    CInt(Tokens.Case1), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The overload that doesn't specify generic context throws an exception
            ' because there is insufficient context to resolve the token.
            Try
                miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case1)), MethodInfo)
            Catch ex As Exception
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message)
            End Try
        
        
            ' Case 2: A non-generic method call that is dependent on its generic context.
            '
            ' Create and display a MethodInfo representing the MemberRef of the 
            ' non-generic method g.M1() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            t = GetType(G1(Of )).MakeGenericType(GetType(G2(Of )).GetGenericArguments())
            miTest = t.GetMethod("M1")
            Console.WriteLine(vbCrLf & "Case 2:" & vbCrLf & miTest.ToString())
        
            ' Resolve the MemberRef token for method G1(Of Tg2).M1(), which is
            ' called in method G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments 
            ' method must be used to obtain the context for resolving the method, 
            ' because the method parameter comes from the generic type G1, and the 
            ' because argument, Tg2, comes from the generic type that encloses the 
            ' call. There is no enclosing generic method, so Type.EmptyTypes could
            ' be passed for the genericMethodArguments parameter.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case2), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The overload that doesn't specify generic context throws an exception
            ' because there is insufficient context to resolve the token.
            Try
                miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case2)), MethodInfo)
            Catch ex As Exception
                Console.WriteLine("{0}: {1}", ex.GetType(), ex.Message)
            End Try
        
        
            ' Case 3: A generic method call that is independent of its generic context.
            '
            ' Create and display a MethodInfo representing the MethodSpec of the 
            ' generic method gi.GM1(Of Object)() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            mi = GetType(G1(Of Integer)).GetMethod("GM1")
            miTest = mi.MakeGenericMethod(New Type() {GetType(Object)})
            Console.WriteLine(vbCrLf & "Case 3:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method G1(Of Integer).GM1(Of Object)(), which is 
            ' calledin G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments method is  
            ' used to obtain the context for resolving the method, but the method call
            ' in this case does not use type parameters of the enclosing type or
            ' method, so Type.EmptyTypes could be used for both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case3), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on the enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case3)), MethodInfo)
        
        
            ' Case 4: A non-generic method call that is independent of its generic context.
            '
            ' Create and display a MethodInfo representing the MethodDef of the 
            ' method e.M() that is called in G2(Of Tg2).GM2(Of Tgm2)().
            miTest = GetType(Example).GetMethod("M")
            Console.WriteLine(vbCrLf & "Case 4:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method Example.M(), which is called in
            ' G2(Of Tg2).GM2(Of Tgm2)(). The GetGenericArguments method is used to 
            ' obtain the context for resolving the method, but the non-generic 
            ' method call does not use type parameters of the enclosing type or
            ' method, so Type.EmptyTypes could be used for both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case4), _
                    GetType(G2(Of )).GetGenericArguments(), _
                    GetType(G2(Of )).GetMethod("GM2").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on any enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case4)), MethodInfo)
        
        
            ' Case 5: Generic method call in a non-generic context.
            '
            ' Create and display a MethodInfo representing the MethodRef of the 
            ' closed generic method g.GM1(Of Object)() that is called in Example.M().
            mi = GetType(G1(Of Integer)).GetMethod("GM1")
            miTest = mi.MakeGenericMethod(New Type() {GetType(Object)})
            Console.WriteLine(vbCrLf & "Case 5:" & vbCrLf & miTest.ToString())
        
            ' Resolve the token for method G1(Of Integer).GM1(Of Object)(), which is 
            ' called in method Example.M(). The GetGenericArguments method is used to 
            ' obtain the context for resolving the method, but the enclosing type
            ' and method are not generic, so Type.EmptyTypes could be used for
            ' both arguments.
            miResolved = CType(m.ResolveMethod( _
                    CInt(Tokens.Case5), _
                    GetType(Example).GetGenericArguments(), _
                    GetType(Example).GetMethod("M").GetGenericArguments()), _
                MethodInfo)
            Console.WriteLine(miResolved)
            Console.WriteLine("Is the resolved method the same? {0}", miResolved Is miTest)
        
            ' The method call in this case does not depend on any enclosing generic
            ' context, so the token can also be resolved by the simpler overload.
            miResolved2 = CType(m.ResolveMethod(CInt(Tokens.Case5)), MethodInfo)
    
        End Sub 
    End Class 
End Namespace

' This example produces the following output:
'
'Case 1:
'Void GM1[Tgm2](Tg2, Tgm2)
'Void GM1[Tgm2](Tg2, Tgm2)
'Is the resolved method the same? True
'System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.
'
'Case 2:
'Void M1(Tg2)
'Void M1(Tg2)
'Is the resolved method the same? True
'System.ArgumentException: A BadImageFormatException has been thrown while parsing the signature. This is likely due to lack of a generic context. Ensure genericTypeArguments and genericMethodArguments are provided and contain enough context.
'
'Case 3:
'Void GM1[Object](Int32, System.Object)
'Void GM1[Object](Int32, System.Object)
'Is the resolved method the same? True
'
'Case 4:
'Void M()
'Void M()
'Is the resolved method the same? True
'
'Case 5:
'Void GM1[Object](Int32, System.Object)
'Void GM1[Object](Int32, System.Object)
'Is the resolved method the same? True
'

注釈

シグネチャに要素型ELEMENT_TYPE_VARまたはELEMENT_TYPE_MVARが含まれるMethodSpecのメタデータ トークンを解決するには、ResolveMethod(Int32, Type[], Type[]) メソッドオーバーロードを使用します。これにより、必要なコンテキストを指定できます。 つまり、ジェネリック型のジェネリック型パラメーターまたはトークンが埋め込まれているジェネリック メソッドに依存するメソッドのメタデータ トークンを解決する場合は、それらの型パラメーターを指定できるオーバーロードを使用する必要があります。