SqlBulkCopy.WriteToServer メソッド

ソース:

System.Data.SqlClient.notsupported.cs

public:
 void WriteToServer(System::Data::DataTable ^ table, System::Data::DataRowState rowState);

public void WriteToServer(System.Data.DataTable table, System.Data.DataRowState rowState);

member this.WriteToServer : System.Data.DataTable * System.Data.DataRowState -> unit

Public Sub WriteToServer (table As DataTable, rowState As DataRowState)

パラメーター

例

次のコンソール アプリケーションは、指定した状態に一致する DataTable 内の行のみを一括読み込みする方法を示しています。 この場合、変更されていない行のみが追加されます。 変換先テーブルは、 AdventureWorks データベース内のテーブルです。

この例では、実行時に DataTable が作成され、3 つの行が追加されます。 WriteToServer メソッドを実行する前に、いずれかの行が編集されます。 WriteToServer メソッドは DataRowState.UnchangedrowState 引数を使用して呼び出されるため、変更されていない 2 つの行のみが一括コピー先にコピーされます。

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Make a change to one of the rows in the DataTable.
            DataRow row = newProducts.Rows[0];
            row.BeginEdit();
            row["Name"] = "AAA";
            row.EndEdit();

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write unchanged rows from the source to the destination.
                    bulkCopy.WriteToServer(newProducts, DataRowState.Unchanged);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Make a change to one of the rows in the DataTable.
            Dim row As DataRow = newProducts.Rows(0)
            row.BeginEdit()
            row("Name") = "AAA"
            row.EndEdit()

            ' Set up the bulk copy object. 
            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write unchanged rows from the source to the destination.
                    bulkCopy.WriteToServer(newProducts, DataRowState.Unchanged)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

注釈

DataTable引数に示されている状態にあり、削除されていないrowState内の行のみがコピー先テーブルにコピーされます。

一括コピー操作の進行中は、関連付けられているコピー先 SqlConnection がサービスをビジー状態にしており、接続に対して他の操作を実行することはできません。

ColumnMappings コレクションは、DataTable列からコピー先データベース テーブルにマップされます。

こちらもご覧ください

• DataRowState
• SQL Server での一括コピー操作
• ADO.NET の概要

ソース:

System.Data.SqlClient.notsupported.cs

public:
 void WriteToServer(System::Data::IDataReader ^ reader);

public void WriteToServer(System.Data.IDataReader reader);

member this.WriteToServer : System.Data.IDataReader -> unit

Public Sub WriteToServer (reader As IDataReader)

パラメーター

例

次のコンソール アプリケーションは、 SqlDataReaderからデータを一括読み込みする方法を示しています。 変換先テーブルは、 AdventureWorks データベース内のテーブルです。

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object using a connection string.
            // In the real world you would not use SqlBulkCopy to move
            // data from one table to the other in the same database.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write from the source to the destination.
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object using a connection string. 
            ' In the real world you would not use SqlBulkCopy to move
            ' data from one table to the other in the same database.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

注釈

コピー操作は、リーダーの次に使用可能な行から開始されます。 ほとんどの場合、リーダーは ExecuteReader または同様の呼び出しによって返されたので、次に使用可能な行は最初の行です。 複数の結果を処理するには、データ リーダーで NextResult を呼び出し、 WriteToServer をもう一度呼び出します。

WriteToServerを使用すると、リーダーの状態が変更されることに注意してください。 メソッドは、false が返されるか、操作が中止されるか、エラーが発生するまで、 Read を呼び出します。 つまり、データ リーダーは、 WriteToServer 操作が完了すると、おそらく結果セットの最後に別の状態になります。

一括コピー操作の進行中は、関連付けられているコピー先 SqlConnection がサービスをビジー状態にしており、接続に対して他の操作を実行することはできません。

ColumnMappings コレクションは、データ リーダー列からコピー先データベース テーブルにマップされます。

こちらもご覧ください

• SQL Server での一括コピー操作
• ADO.NET の概要

ソース:

System.Data.SqlClient.notsupported.cs

public:
 void WriteToServer(System::Data::DataTable ^ table);

public void WriteToServer(System.Data.DataTable table);

member this.WriteToServer : System.Data.DataTable -> unit

Public Sub WriteToServer (table As DataTable)

パラメーター

例

次のコンソール アプリケーションは、 DataTableからデータを一括読み込みする方法を示しています。 変換先テーブルは、 AdventureWorks データベース内のテーブルです。

この例では、 DataTable は実行時に作成され、 SqlBulkCopy 操作のソースです。

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write from the source to the destination.
                    bulkCopy.WriteToServer(newProducts);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(newProducts)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

注釈

削除された行を除き、 DataTable 内のすべての行がコピー先テーブルにコピーされます。

一括コピー操作の進行中は、関連付けられているコピー先 SqlConnection がサービスをビジー状態にしており、接続に対して他の操作を実行することはできません。

ColumnMappings コレクションは、DataTable列からコピー先データベース テーブルにマップされます。

こちらもご覧ください

• SQL Server での一括コピー操作
• ADO.NET の概要

ソース:

System.Data.SqlClient.notsupported.cs

public:
 void WriteToServer(System::Data::Common::DbDataReader ^ reader);

public void WriteToServer(System.Data.Common.DbDataReader reader);

member this.WriteToServer : System.Data.Common.DbDataReader -> unit

Public Sub WriteToServer (reader As DbDataReader)

パラメーター

ソース:

System.Data.SqlClient.notsupported.cs

public:
 void WriteToServer(cli::array <System::Data::DataRow ^> ^ rows);

public void WriteToServer(System.Data.DataRow[] rows);

member this.WriteToServer : System.Data.DataRow[] -> unit

Public Sub WriteToServer (rows As DataRow())

パラメーター

例

次のコンソール アプリケーションは、 DataRow 配列からデータを一括読み込みする方法を示しています。 変換先テーブルは、 AdventureWorks データベース内のテーブルです。

この例では、実行時に DataTable が作成されます。 コピー先テーブルにコピーする DataTable から 1 つの行が選択されます。

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Get a reference to a single row in the table.
            DataRow[] rowArray = newProducts.Select(
                "Name='CC-101-BK'");

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write the array of rows to the destination.
                    bulkCopy.WriteToServer(rowArray);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Get a reference to a single row in the table.
            Dim rowArray() As DataRow = newProducts.Select( _
             "Name='CC-101-BK'")

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write the array of rows to the destination.
                    bulkCopy.WriteToServer(rowArray)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

注釈

一括コピー操作の進行中は、関連付けられているコピー先 SqlConnection がサービスをビジー状態にしており、接続に対して他の操作を実行することはできません。

ColumnMappings コレクションは、DataRow列からコピー先データベース テーブルにマップされます。

こちらもご覧ください

• SQL Server での一括コピー操作
• ADO.NET の概要