Convert.ChangeType Methode

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

public:
 static System::Object ^ ChangeType(System::Object ^ value, Type ^ conversionType);

public static object ChangeType(object value, Type conversionType);

public static object? ChangeType(object? value, Type conversionType);

static member ChangeType : obj * Type -> obj

Public Shared Function ChangeType (value As Object, conversionType As Type) As Object

Parameter

Gibt zurück

Ein Objekt, dessen Typ und conversionType dessen Wert entspricht value.

-oder-

Ein Nullverweis (Nothing in Visual Basic), wenn valuenull und conversionType kein Werttyp ist.

Ausnahmen

Beispiele

Das folgende Beispiel veranschaulicht die Verwendung der ChangeType Methode.

using System;

public class ChangeTypeTest {
    public static void Main() {

        Double d = -2.345;
        int i = (int)Convert.ChangeType(d, typeof(int));

        Console.WriteLine("The double value {0} when converted to an int becomes {1}", d, i);

        string s = "12/12/98";
        DateTime dt = (DateTime)Convert.ChangeType(s, typeof(DateTime));

        Console.WriteLine("The string value {0} when converted to a Date becomes {1}", s, dt);
    }
}

open System

let d = -2.345
let i = Convert.ChangeType(d, typeof<int>) :?> int

printfn $"The double value {d} when converted to an int becomes {i}"

let s = "12/12/98"
let dt = Convert.ChangeType(s, typeof<DateTime>) :?> DateTime

printfn $"The string value {s} when converted to a Date becomes {dt}"

Public Class ChangeTypeTest
    
    Public Shared Sub Main()
        Dim d As [Double] = - 2.345
        Dim i As Integer = CInt(Convert.ChangeType(d, GetType(Integer)))
        
        Console.WriteLine("The double value {0} when converted to an int becomes {1}", d, i)
        Dim s As String = "12/12/98"
        Dim dt As DateTime = CType(Convert.ChangeType(s, GetType(DateTime)), DateTime)
        
        Console.WriteLine("The string value {0} when converted to a Date becomes {1}", s, dt)
    End Sub
End Class

Hinweise

ChangeType ist eine allgemeine Konvertierungsmethode, die das durch valueconversionType. Der value Parameter kann ein Objekt eines beliebigen Typs sein und conversionType kann auch ein Type Objekt sein, das einen beliebigen Basis- oder benutzerdefinierten Typ darstellt. Damit die Konvertierung erfolgreich ist, value muss die IConvertible Schnittstelle implementiert werden, da die Methode einfach einen Aufruf an eine entsprechende IConvertible Methode umschließt. Für die Methode muss die Konvertierung valueconversionType unterstützt werden.

Diese Methode verwendet die Kultur des aktuellen Threads für die Konvertierung.

Hinweise für Aufrufer

Die ChangeType(Object, Type) Methode kann einen Enumerationswert in einen anderen Typ konvertieren. Ein anderer Typ kann jedoch nicht in einen Enumerationswert konvertiert werden, auch wenn der Quelltyp der zugrunde liegende Typ der Enumeration ist. Verwenden Sie zum Konvertieren eines Typs in einen Enumerationswert einen Umwandlungsoperator (in C#) oder eine Konvertierungsfunktion (in Visual Basic). Im folgenden Beispiel wird die Konvertierung in und aus einem Continent Enumerationswert veranschaulicht.

using System;

public enum Continent
{
   Africa, Antarctica, Asia, Australia, Europe,
   NorthAmerica, SouthAmerica
};

public class Example
{
   public static void Main()
   {
      // Convert a Continent to a Double.
      Continent cont = Continent.NorthAmerica;
      Console.WriteLine("{0:N2}",
                        Convert.ChangeType(cont, typeof(Double)));

      // Convert a Double to a Continent.
      Double number = 6.0;
      try {
         Console.WriteLine("{0}",
                           Convert.ChangeType(number, typeof(Continent)));
      }
      catch (InvalidCastException) {
         Console.WriteLine("Cannot convert a Double to a Continent");
      }

      Console.WriteLine("{0}", (Continent) number);
   }
}
// The example displays the following output:
//       5.00
//       Cannot convert a Double to a Continent
//       SouthAmerica

open System

type Continent =
    | Africa = 0
    | Antarctica = 1
    | Asia = 2
    | Australia = 3
    | Europe = 4
    | NorthAmerica = 5
    | SouthAmerica = 6

// Convert a Continent to a Double.
let cont = Continent.NorthAmerica
printfn $"{Convert.ChangeType(cont, typeof<Double>):N2}"

// Convert a Double to a Continent.
let number = 6.0
try
    printfn $"{Convert.ChangeType(number, typeof<Continent>)}"
with :? InvalidCastException ->
    printfn "Cannot convert a Double to a Continent"

printfn $"{int number |> enum<Continent>}"
// The example displays the following output:
//       5.00
//       Cannot convert a Double to a Continent
//       SouthAmerica

Public Enum Continent As Integer
   Africa = 0
   Antarctica = 1
   Asia = 2
   Australia = 3
   Europe = 4
   NorthAmerica = 5
   SouthAmerica = 6
End Enum

Module Example
   Public Sub Main()
      ' Convert a Continent to a Double.
      Dim cont As Continent = Continent.NorthAmerica
      Console.WriteLine("{0:N2}", 
                        Convert.ChangeType(cont, GetType(Double)))
   
      ' Convert a Double to a Continent.
      Dim number As Double = 6.0
      Try
         Console.WriteLine("{0}", 
                           Convert.ChangeType(number, GetType(Continent)))
      Catch e As InvalidCastException
         Console.WriteLine("Cannot convert a Double to a Continent")
      End Try
      
      Console.WriteLine("{0}", CType(number, Continent))   
   End Sub
End Module
' The example displays the following output:
'    5.00
'    Cannot convert a Double to a Continent
'    SouthAmerica

Die ChangeType(Object, Type) Methode kann einen nullfähigen Typ in einen anderen Typ konvertieren. Ein anderer Typ kann jedoch nicht in einen Wert eines nullfähigen Typs konvertiert werden, auch wenn conversionType der zugrunde liegende Typ des Nullable<T> ist. Zum Ausführen der Konvertierung können Sie einen Umwandlungsoperator (in C#) oder eine Konvertierungsfunktion (in Visual Basic) verwenden. Im folgenden Beispiel wird die Konvertierung in und von einem nullfähigen Typ veranschaulicht.

using System;

public class Example
{
   public static void Main()
   {
      int? intValue1 = 12893;
      double dValue1 = (double) Convert.ChangeType(intValue1, typeof(Double));
      Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
                        dValue1, dValue1.GetType().Name);

      float fValue1 = 16.3478f;
      int? intValue2 = (int) fValue1;
      Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
                        intValue2, intValue2.GetType().Name);
   }
}
// The example displays the following output:
//    12893 (Int32)--> 12893 (Double)
//    16.3478 (Single)--> 16 (Int32)

open System

let intValue1 = Nullable 12893
let dValue1 = Convert.ChangeType(intValue1, typeof<Double>) :?> double
printfn $"{intValue1} ({intValue1.GetType().Name})--> {dValue1} ({dValue1.GetType().Name})" 

let fValue1 = 16.3478f
let intValue2 = Nullable(int fValue1)
printfn $"{fValue1} ({fValue1.GetType().Name})--> {intValue2} ({intValue2.GetType().Name})"

// The example displays the following output:
//    12893 (Int32)--> 12893 (Double)
//    16.3478 (Single)--> 16 (Int32)

Module Example
   Public Sub Main()
      Dim intValue1 As Integer? = 12893
      Dim dValue1 As Double = CType(Convert.ChangeType(intValue1, GetType(Double)), Double)
      Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
                        dValue1, dValue1.GetType().Name)
      

      Dim fValue1 As Single = 16.3478
      Dim intValue2 As Integer? = CType(fValue1, Integer) 
      Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
                        intValue2, intValue2.GetType().Name)
   End Sub
End Module
' The example displays the following output:
'       12893 (Int32)--> 12893 (Double)
'       16.3478 (Single)--> 16 (Int32)

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

public:
 static System::Object ^ ChangeType(System::Object ^ value, TypeCode typeCode);

public static object? ChangeType(object? value, TypeCode typeCode);

public static object ChangeType(object value, TypeCode typeCode);

static member ChangeType : obj * TypeCode -> obj

Public Shared Function ChangeType (value As Object, typeCode As TypeCode) As Object

Parameter

Gibt zurück

Ein Objekt, dessen zugrunde liegender Typ ist typeCode und dessen Wert entspricht value.

-oder-

Ein Nullverweis (Nothing in Visual Basic), wenn valuenull ist und typeCodeEmpty, String oder Object ist.

Ausnahmen

Beispiele

Im folgenden Beispiel wird veranschaulicht, wie Die ChangeType(Object, TypeCode) Methode verwendet wird, um den Object durch den TypeCode Parameter angegebenen Typ zu ändern, falls möglich.

using System;

public class ChangeTypeTest {
    public static void Main() {

        Double d = -2.345;
        int i = (int)Convert.ChangeType(d, TypeCode.Int32);

        Console.WriteLine("The Double {0} when converted to an Int32 is {1}", d, i);

        string s = "12/12/2009";
        DateTime dt = (DateTime)Convert.ChangeType(s, typeof(DateTime));

        Console.WriteLine("The String {0} when converted to a Date is {1}", s, dt);
    }
}
// The example displays the following output:
//    The Double -2.345 when converted to an Int32 is -2
//    The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM

open System

let d = -2.345
let i = Convert.ChangeType(d, TypeCode.Int32) :?> int

printfn $"The Double {d} when converted to an Int32 is {i}"

let s = "12/12/2009"
let dt = Convert.ChangeType(s, typeof<DateTime>) :?> DateTime

printfn $"The String {s} when converted to a Date is {dt}"
// The example displays the following output:
//    The Double -2.345 when converted to an Int32 is -2
//    The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM

Public Class ChangeTypeTest
    
    Public Shared Sub Main()
        Dim d As [Double] = - 2.345
        Dim i As Integer = CInt(Convert.ChangeType(d, TypeCode.Int32))
        
        Console.WriteLine("The Double {0} when converted to an Int32 is {1}", d, i)
        Dim s As String = "12/12/2009"
        Dim dt As DateTime = CDate(Convert.ChangeType(s, TypeCode.DateTime))
        
        Console.WriteLine("The String {0} when converted to a Date is {1}", s, dt)
    End Sub 
End Class 
' The example displays the following output:
'    The Double -2.345 when converted to an Int32 is -2
'    The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM

Hinweise

ChangeType(Object, TypeCode) ist eine allgemeine Konvertierungsmethode, die das durch value einen vordefinierten Typ angegebene typeCodeObjekt konvertiert. Der value Parameter kann ein Objekt eines beliebigen Typs sein. Damit die Konvertierung erfolgreich ist, value muss die IConvertible Schnittstelle implementiert werden, da die Methode einfach einen Aufruf an eine entsprechende IConvertible Methode umschließt. Die Methode erfordert auch, dass die Konvertierung valuetypeCode unterstützt wird.

Die ChangeType(Object, TypeCode) Methode unterstützt die Konvertierung von value einem benutzerdefinierten Typ nicht. Rufen Sie die ChangeType(Object, Type) Methode auf, um eine solche Konvertierung durchzuführen.

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

public:
 static System::Object ^ ChangeType(System::Object ^ value, Type ^ conversionType, IFormatProvider ^ provider);

public static object ChangeType(object value, Type conversionType, IFormatProvider provider);

public static object? ChangeType(object? value, Type conversionType, IFormatProvider? provider);

static member ChangeType : obj * Type * IFormatProvider -> obj

Public Shared Function ChangeType (value As Object, conversionType As Type, provider As IFormatProvider) As Object

Parameter

Gibt zurück

Ein Objekt, dessen Typ und conversionType dessen Wert entspricht value.

-oder-

value, wenn die Type von value und conversionType sind gleich.

-oder-

Ein Nullverweis (Nothing in Visual Basic), wenn valuenull und conversionType kein Werttyp ist.

Ausnahmen

Beispiele

Im folgenden Beispiel wird eine Temperature -Klasse definiert, die die IConvertible -Schnittstelle implementiert.

using System;
using System.Globalization;

public class Temperature : IConvertible
{
   private decimal m_Temp;

   public Temperature(decimal temperature)
   {
      this.m_Temp = temperature;
   }

   public decimal Celsius
   {
      get { return this.m_Temp; }
   }

   public decimal Kelvin
   {
      get { return this.m_Temp + 273.15m; }
   }

   public decimal Fahrenheit
   {
      get { return Math.Round((decimal) (this.m_Temp * 9 / 5 + 32), 2); }
   }

   public override string ToString()
   {
      return m_Temp.ToString("N2") + "°C";
   }

   // IConvertible implementations.
   public TypeCode GetTypeCode()
   {
      return TypeCode.Object;
   }

   public bool ToBoolean(IFormatProvider provider)
   {
      if (m_Temp == 0)
         return false;
      else
         return true;
   }

   public byte ToByte(IFormatProvider provider)
   {
      if (m_Temp < Byte.MinValue || m_Temp > Byte.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the Byte type.",
                                                   this.m_Temp));
      else
         return Decimal.ToByte(this.m_Temp);
   }

   public char ToChar(IFormatProvider provider)
   {
      throw new InvalidCastException("Temperature to Char conversion is not supported.");
   }

   public DateTime ToDateTime(IFormatProvider provider)
   {
      throw new InvalidCastException("Temperature to DateTime conversion is not supported.");
   }

   public decimal ToDecimal(IFormatProvider provider)
   {
      return this.m_Temp;
   }

   public double ToDouble(IFormatProvider provider)
   {
      return Decimal.ToDouble(this.m_Temp);
   }

   public short ToInt16(IFormatProvider provider)
   {
      if (this.m_Temp < Int16.MinValue || this.m_Temp > Int16.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the Int16 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToInt16(this.m_Temp);
   }

   public int ToInt32(IFormatProvider provider)
      {
      if (this.m_Temp < Int32.MinValue || this.m_Temp > Int32.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the Int32 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToInt32(this.m_Temp);
   }

   public long ToInt64(IFormatProvider provider)
   {
      if (this.m_Temp < Int64.MinValue || this.m_Temp > Int64.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the Int64 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToInt64(this.m_Temp);
   }

   public sbyte ToSByte(IFormatProvider provider)
   {
      if (this.m_Temp < SByte.MinValue || this.m_Temp > SByte.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the SByte type.",
                                                   this.m_Temp));
      else
         return Decimal.ToSByte(this.m_Temp);
   }

   public float ToSingle(IFormatProvider provider)
   {
      return Decimal.ToSingle(this.m_Temp);
   }

   public string ToString(IFormatProvider provider)
   {
      return m_Temp.ToString("N2", provider) + "°C";
   }

   public object ToType(Type conversionType, IFormatProvider provider)
   {
      switch (Type.GetTypeCode(conversionType))
      {
         case TypeCode.Boolean:
            return this.ToBoolean(null);
         case TypeCode.Byte:
            return this.ToByte(null);
         case TypeCode.Char:
            return this.ToChar(null);
         case TypeCode.DateTime:
            return this.ToDateTime(null);
         case TypeCode.Decimal:
            return this.ToDecimal(null);
         case TypeCode.Double:
            return this.ToDouble(null);
         case TypeCode.Int16:
            return this.ToInt16(null);
         case TypeCode.Int32:
            return this.ToInt32(null);
         case TypeCode.Int64:
            return this.ToInt64(null);
         case TypeCode.Object:
            if (typeof(Temperature).Equals(conversionType))
               return this;
            else
               throw new InvalidCastException(String.Format("Conversion to a {0} is not supported.",
                                                            conversionType.Name));
         case TypeCode.SByte:
            return this.ToSByte(null);
         case TypeCode.Single:
            return this.ToSingle(null);
         case TypeCode.String:
            return this.ToString(provider);
         case TypeCode.UInt16:
            return this.ToUInt16(null);
         case TypeCode.UInt32:
            return this.ToUInt32(null);
         case TypeCode.UInt64:
            return this.ToUInt64(null);
         default:
            throw new InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name));
      }
   }

   public ushort ToUInt16(IFormatProvider provider)
   {
      if (this.m_Temp < UInt16.MinValue || this.m_Temp > UInt16.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the UInt16 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToUInt16(this.m_Temp);
   }

   public uint ToUInt32(IFormatProvider provider)
   {
      if (this.m_Temp < UInt32.MinValue || this.m_Temp > UInt32.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the UInt32 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToUInt32(this.m_Temp);
   }

   public ulong ToUInt64(IFormatProvider provider)
   {
      if (this.m_Temp < UInt64.MinValue || this.m_Temp > UInt64.MaxValue)
         throw new OverflowException(String.Format("{0} is out of range of the UInt64 type.",
                                                   this.m_Temp));
      else
         return Decimal.ToUInt64(this.m_Temp);
   }
}

open System
open System.Globalization

type Temperature(temperature: decimal) = 

    member _.Celsius = temperature

    member _.Kelvin =
        temperature + 273.15m

    member _.Fahrenheit =
        Math.Round(decimal (temperature * 9m / 5m + 32m), 2)

    override _.ToString() =
        temperature.ToString "N2" + "°C"

    // IConvertible implementations.
    interface IConvertible with
        member _.GetTypeCode() =
            TypeCode.Object

        member _.ToBoolean(provider: IFormatProvider) =
            temperature <> 0M

        member _.ToByte(provider: IFormatProvider) =
            if temperature < decimal Byte.MinValue || temperature > decimal Byte.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the Byte type.")
            else
                Decimal.ToByte temperature

        member _.ToChar(provider: IFormatProvider) =
            raise (InvalidCastException "Temperature to Char conversion is not supported.")

        member _.ToDateTime(provider: IFormatProvider) =
            raise (InvalidCastException "Temperature to DateTime conversion is not supported.")

        member _.ToDecimal(provider: IFormatProvider) =
            temperature

        member _.ToDouble(provider: IFormatProvider) =
            Decimal.ToDouble temperature

        member _.ToInt16(provider: IFormatProvider) =
            if temperature < decimal Int16.MinValue || temperature > decimal Int16.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the Int16 type.")
            else
                Decimal.ToInt16 temperature

        member _.ToInt32(provider: IFormatProvider) =
            if temperature < decimal Int32.MinValue || temperature > decimal Int32.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the Int32 type.")
            else
                Decimal.ToInt32 temperature

        member _.ToInt64(provider: IFormatProvider) =
            if temperature < decimal Int64.MinValue || temperature > decimal Int64.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the Int64 type.")
            else
                Decimal.ToInt64 temperature

        member _.ToSByte(provider: IFormatProvider) =
            if temperature < decimal SByte.MinValue || temperature > decimal SByte.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the SByte type.")
            else
                Decimal.ToSByte temperature

        member _.ToSingle(provider: IFormatProvider) =
            Decimal.ToSingle temperature

        member _.ToString(provider: IFormatProvider) =
            temperature.ToString("N2", provider) + "°C"

        member this.ToType(conversionType: Type, provider: IFormatProvider) =
            let this = this :> IConvertible
            match Type.GetTypeCode conversionType with
            | TypeCode.Boolean->
                this.ToBoolean null
            | TypeCode.Byte ->
                this.ToByte null
            | TypeCode.Char ->
                this.ToChar null
            | TypeCode.DateTime ->
                this.ToDateTime null
            | TypeCode.Decimal ->
                this.ToDecimal null
            | TypeCode.Double ->
                this.ToDouble null
            | TypeCode.Int16 ->
                this.ToInt16 null
            | TypeCode.Int32 ->
                this.ToInt32 null
            | TypeCode.Int64 ->
                this.ToInt64 null
            | TypeCode.Object ->
                if typeof<Temperature>.Equals conversionType then
                    this
                else
                    raise (InvalidCastException $"Conversion to a {conversionType.Name} is not supported.")
            | TypeCode.SByte ->
                this.ToSByte null
            | TypeCode.Single ->
                this.ToSingle null
            | TypeCode.String ->
                this.ToString provider
            | TypeCode.UInt16 ->
                this.ToUInt16 null
            | TypeCode.UInt32->
                this.ToUInt32 null
            | TypeCode.UInt64->
                this.ToUInt64 null
            | _ ->
                raise (InvalidCastException $"Conversion to {conversionType.Name} is not supported.")

        member _.ToUInt16(provider: IFormatProvider) =
            if temperature < decimal UInt16.MinValue || temperature > decimal UInt16.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the UInt16 type.")
            else
                Decimal.ToUInt16 temperature

        member _.ToUInt32(provider: IFormatProvider) =
            if temperature < decimal UInt32.MinValue || temperature > decimal UInt32.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the UInt32 type.")
            else
                Decimal.ToUInt32 temperature

        member _.ToUInt64(provider: IFormatProvider) =
            if temperature < decimal UInt64.MinValue || temperature > decimal UInt64.MaxValue then
                raise (OverflowException $"{temperature} is out of range of the UInt64 type.")
            else
                Decimal.ToUInt64 temperature

Imports System.Globalization

Public Class Temperature : Implements IConvertible
   Private m_Temp As Decimal

   Public Sub New(temperature As Decimal)
      Me.m_Temp = temperature
   End Sub
   
   Public ReadOnly Property Celsius() As Decimal
      Get
         Return Me.m_Temp
      End Get   
   End Property
   
   Public ReadOnly Property Kelvin() As Decimal
      Get
         Return Me.m_Temp + 273.15d   
      End Get
   End Property
   
   Public ReadOnly Property Fahrenheit() As Decimal
      Get
         Return Math.Round(CDec(Me.m_Temp * 9 / 5 + 32), 2)
      End Get      
   End Property
   
   Public Overrides Function ToString() As String
      Return m_Temp.ToString("N2") & "°C"
   End Function

   ' IConvertible implementations.
   Public Function GetTypeCode() As TypeCode _
                   Implements IConvertible.GetTypeCode
      Return TypeCode.Object
   End Function
   
   Public Function ToBoolean(provider As IFormatProvider) As Boolean _
                   Implements IConvertible.ToBoolean
      If m_Temp = 0 Then
         Return False
      Else
         Return True
      End If
   End Function 
   
   Public Function ToByte(provider As IFormatProvider) As Byte _
                   Implements IConvertible.ToByte
      If m_Temp < Byte.MinValue Or m_Temp > Byte.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", _ 
                                                   Me.m_Temp)) 
      Else
         Return Decimal.ToByte(Me.m_Temp)
      End If       
   End Function
   
   Public Function ToChar(provider As IFormatProvider) As Char _
                   Implements IConvertible.ToChar
      Throw New InvalidCastException("Temperature to Char conversion is not supported.")
   End Function 
   
   Public Function ToDateTime(provider As IFormatProvider) As Date _
                   Implements IConvertible.ToDateTime
      Throw New InvalidCastException("Temperature to DateTime conversion is not supported.")
   End Function
   
   Public Function ToDecimal(provider As IFormatProvider) As Decimal _
                   Implements IConvertible.ToDecimal
      Return Me.m_Temp
   End Function
   
   Public Function ToDouble(provider As IFormatProvider) As Double _
                   Implements IConvertible.ToDouble
      Return Decimal.ToDouble(Me.m_Temp)
   End Function   
   
   Public Function ToInt16(provider As IFormatProvider) As Int16 _
                   Implements IConvertible.ToInt16
      If Me.m_Temp < Int16.MinValue Or Me.m_Temp > Int16.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the Int16 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToInt16(Me.m_Temp)   
      End If
   End Function
   
   Public Function ToInt32(provider As IFormatProvider) As Int32 _
                   Implements IConvertible.ToInt32
      If Me.m_Temp < Int32.MinValue Or Me.m_Temp > Int32.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the Int32 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToInt32(Me.m_Temp)
      End If      
   End Function
   
   Public Function ToInt64(provider As IFormatProvider) As Int64 _
                   Implements IConvertible.ToInt64
      If Me.m_Temp < Int64.MinValue Or Me.m_Temp > Int64.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the Int64 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToInt64(Me.m_Temp)
      End If      
   End Function
   
   Public Function ToSByte(provider As IFormatProvider) As SByte _
                   Implements IConvertible.ToSByte
      If Me.m_Temp < SByte.MinValue Or Me.m_Temp > SByte.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the SByte type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToSByte(Me.m_Temp)
      End If      
   End Function

   Public Function ToSingle(provider As IFormatProvider) As Single _
                   Implements IConvertible.ToSingle
      Return Decimal.ToSingle(Me.m_Temp)
   End Function

   Public Overloads Function ToString(provider As IFormatProvider) As String _
                   Implements IConvertible.ToString
      Return m_Temp.ToString("N2", provider) & "°C"
   End Function
   
   Public Function ToType(conversionType As Type, provider As IFormatProvider) As Object _
                   Implements IConvertible.ToType
      Select Case Type.GetTypeCode(conversionType)
         Case TypeCode.Boolean 
            Return Me.ToBoolean(Nothing)
         Case TypeCode.Byte
            Return Me.ToByte(Nothing)
         Case TypeCode.Char
            Return Me.ToChar(Nothing)
         Case TypeCode.DateTime
            Return Me.ToDateTime(Nothing)
         Case TypeCode.Decimal
            Return Me.ToDecimal(Nothing)
         Case TypeCode.Double
            Return Me.ToDouble(Nothing)
         Case TypeCode.Int16
            Return Me.ToInt16(Nothing)
         Case TypeCode.Int32
            Return Me.ToInt32(Nothing)
         Case TypeCode.Int64
            Return Me.ToInt64(Nothing)
         Case TypeCode.Object
            If GetType(Temperature).Equals(conversionType) Then
               Return Me
            Else
               Throw New InvalidCastException(String.Format("Conversion to a {0} is not supported.", _
                                                            conversionType.Name))
            End If 
         Case TypeCode.SByte
            Return Me.ToSByte(Nothing)
         Case TypeCode.Single
            Return Me.ToSingle(Nothing)
         Case TypeCode.String
            Return Me.ToString(provider)
         Case TypeCode.UInt16
            Return Me.ToUInt16(Nothing)
         Case TypeCode.UInt32
            Return Me.ToUInt32(Nothing)
         Case TypeCode.UInt64
            Return Me.ToUInt64(Nothing)   
         Case Else
            Throw New InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name))   
      End Select
   End Function
   
   Public Function ToUInt16(provider As IFormatProvider) As UInt16 _
                   Implements IConvertible.ToUInt16
      If Me.m_Temp < UInt16.MinValue Or Me.m_Temp > UInt16.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the UInt16 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToUInt16(Me.m_Temp)
      End If   
   End Function

   Public Function ToUInt32(provider As IFormatProvider) As UInt32 _
                   Implements IConvertible.ToUInt32
      If Me.m_Temp < UInt32.MinValue Or Me.m_Temp > UInt32.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the UInt32 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToUInt32(Me.m_Temp)
      End If   
   End Function
   
   Public Function ToUInt64(provider As IFormatProvider) As UInt64 _
                   Implements IConvertible.ToUInt64
      If Me.m_Temp < UInt64.MinValue Or Me.m_Temp > UInt64.MaxValue Then
         Throw New OverflowException(String.Format("{0} is out of range of the UInt64 type.", _
                                                   Me.m_Temp))
      Else
         Return Decimal.ToUInt64(Me.m_temp)
      End If   
   End Function
End Class

Im folgenden Beispiel wird eine Instanz der klasse Temperature erstellt und die methode ChangeType(Object, Type, IFormatProvider) aufgerufen, um sie in die grundlegenden numerischen Typen zu konvertieren, die von .NET und in eine String unterstützt werden. Es veranschaulicht, dass die ChangeType Methode einen Aufruf der Implementierung des Quelltyps IConvertible umschließt.

public class Example
{
   public static void Main()
   {
      Temperature cool = new Temperature(5);
      Type[] targetTypes = { typeof(SByte), typeof(Int16), typeof(Int32),
                             typeof(Int64), typeof(Byte), typeof(UInt16),
                             typeof(UInt32), typeof(UInt64), typeof(Decimal),
                             typeof(Single), typeof(Double), typeof(String) };
      CultureInfo provider = new CultureInfo("fr-FR");

      foreach (Type targetType in targetTypes)
      {
         try {
            object value = Convert.ChangeType(cool, targetType, provider);
            Console.WriteLine("Converted {0} {1} to {2} {3}.",
                              cool.GetType().Name, cool.ToString(),
                              targetType.Name, value);
         }
         catch (InvalidCastException) {
            Console.WriteLine("Unsupported {0} --> {1} conversion.",
                              cool.GetType().Name, targetType.Name);
         }
         catch (OverflowException) {
            Console.WriteLine("{0} is out of range of the {1} type.",
                              cool, targetType.Name);
         }
      }
   }
}
// The example dosplays the following output:
//       Converted Temperature 5.00°C to SByte 5.
//       Converted Temperature 5.00°C to Int16 5.
//       Converted Temperature 5.00°C to Int32 5.
//       Converted Temperature 5.00°C to Int64 5.
//       Converted Temperature 5.00°C to Byte 5.
//       Converted Temperature 5.00°C to UInt16 5.
//       Converted Temperature 5.00°C to UInt32 5.
//       Converted Temperature 5.00°C to UInt64 5.
//       Converted Temperature 5.00°C to Decimal 5.
//       Converted Temperature 5.00°C to Single 5.
//       Converted Temperature 5.00°C to Double 5.
//       Converted Temperature 5.00°C to String 5,00°C.

let cool = Temperature 5
let targetTypes = 
    [ typeof<SByte>; typeof<Int16>; typeof<Int32>
      typeof<Int64>; typeof<Byte>; typeof<UInt16>
      typeof<UInt32>; typeof<UInt64>; typeof<Decimal>;
      typeof<Single>; typeof<Double>; typeof<String>; ]

let provider = CultureInfo "fr-FR"

for targetType in targetTypes do
    try
        let value = Convert.ChangeType(cool, targetType, provider)
        printfn $"Converted {cool.GetType().Name} {cool} to {targetType.Name} {value}."
    with
    | :? InvalidCastException ->
        printfn $"Unsupported {cool.GetType().Name} --> {targetType.Name} conversion."
    | :? OverflowException ->
        printfn $"{cool} is out of range of the {targetType.Name} type."

// The example dosplays the following output:
//       Converted Temperature 5.00°C to SByte 5.
//       Converted Temperature 5.00°C to Int16 5.
//       Converted Temperature 5.00°C to Int32 5.
//       Converted Temperature 5.00°C to Int64 5.
//       Converted Temperature 5.00°C to Byte 5.
//       Converted Temperature 5.00°C to UInt16 5.
//       Converted Temperature 5.00°C to UInt32 5.
//       Converted Temperature 5.00°C to UInt64 5.
//       Converted Temperature 5.00°C to Decimal 5.
//       Converted Temperature 5.00°C to Single 5.
//       Converted Temperature 5.00°C to Double 5.
//       Converted Temperature 5.00°C to String 5,00°C.

Module Example
   Public Sub Main()
      Dim cool As New Temperature(5)
      Dim targetTypes() As Type = { GetType(SByte), GetType(Int16), GetType(Int32), _
                                    GetType(Int64), GetType(Byte), GetType(UInt16), _
                                    GetType(UInt32), GetType(UInt64), GetType(Decimal), _
                                    GetType(Single), GetType(Double), GetType(String) }
      Dim provider As New CultureInfo("fr-FR")
      
      For Each targetType As Type In targetTypes
         Try
            Dim value As Object = Convert.ChangeType(cool, targetType, provider)
            Console.WriteLine("Converted {0} {1} to {2} {3}.", _
                              cool.GetType().Name, cool.ToString(), _
                              targetType.Name, value)
         Catch e As InvalidCastException
            Console.WriteLine("Unsupported {0} --> {1} conversion.", _
                              cool.GetType().Name, targetType.Name)
         Catch e As OverflowException
            Console.WriteLine("{0} is out of range of the {1} type.", _
                              cool, targetType.Name)
         End Try                     
      Next
   End Sub
End Module
' The example displays the following output:
'       Converted Temperature 5.00°C to SByte 5.
'       Converted Temperature 5.00°C to Int16 5.
'       Converted Temperature 5.00°C to Int32 5.
'       Converted Temperature 5.00°C to Int64 5.
'       Converted Temperature 5.00°C to Byte 5.
'       Converted Temperature 5.00°C to UInt16 5.
'       Converted Temperature 5.00°C to UInt32 5.
'       Converted Temperature 5.00°C to UInt64 5.
'       Converted Temperature 5.00°C to Decimal 5.
'       Converted Temperature 5.00°C to Single 5.
'       Converted Temperature 5.00°C to Double 5.
'       Converted Temperature 5.00°C to String 5,00°C.

Hinweise

ChangeType ist eine allgemeine Konvertierungsmethode, die das durch valueconversionType. Der value Parameter kann ein Objekt eines beliebigen Typs sein und conversionType kann auch ein Type Objekt sein, das einen beliebigen Basis- oder benutzerdefinierten Typ darstellt. Damit die Konvertierung erfolgreich ist, value muss die IConvertible Schnittstelle implementiert werden, da die Methode einfach einen Aufruf an eine entsprechende IConvertible Methode umschließt. Für die Methode muss die Konvertierung valueconversionType unterstützt werden.

Der provider Parameter ist eine IFormatProvider Implementierung, die Formatierungsinformationen für die Konvertierung bereitstellt. Ob und wie dieser Parameter verwendet wird, hängt von der zugrunde liegenden IConvertible Implementierung ab. Wenn value es sich um einen Basisdatentyp handelt, provider wird nur für die folgenden Konvertierungen verwendet:

• Konvertierung von einer Zahl in eine Zeichenfolge oder von einer Zeichenfolge in eine Zahl. provider muss ein CultureInfo Objekt, ein NumberFormatInfo Objekt oder eine benutzerdefinierte IFormatProvider Implementierung sein, die ein NumberFormatInfo Objekt zurückgibt. Da die Methode die ChangeType(Object, TypeCode, IFormatProvider) Konvertierung jedoch mit dem Standardmäßigen Formatbezeichner "G" durchführt, hat der provider Parameter keine Auswirkung, wenn value oder der Zieltyp eine nicht signierte ganze Zahl ist. Wenn provider ja null, wird das CultureInfo Objekt verwendet, das die aktuelle Kultur darstellt.

• Konvertierung von einem DateTime Wert in eine Zeichenfolge oder von einer Zeichenfolge in einen DateTime Wert. provider muss ein CultureInfo Oder-Objekt DateTimeFormatInfo sein. Wenn provider ja null, wird das CultureInfo Objekt verwendet, das die aktuelle Kultur darstellt.

Wenn value es sich um einen anwendungsdefinierten Typ handelt, kann die IConvertible Implementierung den provider Parameter verwenden.

Hinweise für Aufrufer

Die ChangeType(Object, Type, IFormatProvider) Methode kann einen Enumerationswert in einen anderen Typ konvertieren. Ein anderer Typ kann jedoch nicht in einen Enumerationswert konvertiert werden, auch wenn der Quelltyp der zugrunde liegende Typ der Enumeration ist. Verwenden Sie zum Konvertieren eines Typs in einen Enumerationswert einen Umwandlungsoperator (in C#) oder eine Konvertierungsfunktion (in Visual Basic). Im folgenden Beispiel wird die Konvertierung in und aus einem Continent Enumerationswert veranschaulicht.

using System;

public enum Continent
{
   Africa, Antarctica, Asia, Australia, Europe,
   NorthAmerica, SouthAmerica
};

public class Example
{
   public static void Main()
   {
      // Convert a Continent to a Double.
      Continent cont = Continent.NorthAmerica;
      Console.WriteLine("{0:N2}",
                        Convert.ChangeType(cont, typeof(Double)));

      // Convert a Double to a Continent.
      Double number = 6.0;
      try {
         Console.WriteLine("{0}",
                           Convert.ChangeType(number, typeof(Continent)));
      }
      catch (InvalidCastException) {
         Console.WriteLine("Cannot convert a Double to a Continent");
      }

      Console.WriteLine("{0}", (Continent) number);
   }
}
// The example displays the following output:
//       5.00
//       Cannot convert a Double to a Continent
//       SouthAmerica

open System

type Continent =
    | Africa = 0
    | Antarctica = 1
    | Asia = 2
    | Australia = 3
    | Europe = 4
    | NorthAmerica = 5
    | SouthAmerica = 6

// Convert a Continent to a Double.
let cont = Continent.NorthAmerica
printfn $"{Convert.ChangeType(cont, typeof<Double>):N2}"

// Convert a Double to a Continent.
let number = 6.0
try
    printfn $"{Convert.ChangeType(number, typeof<Continent>)}"
with :? InvalidCastException ->
    printfn "Cannot convert a Double to a Continent"

printfn $"{int number |> enum<Continent>}"
// The example displays the following output:
//       5.00
//       Cannot convert a Double to a Continent
//       SouthAmerica

Public Enum Continent As Integer
   Africa = 0
   Antarctica = 1
   Asia = 2
   Australia = 3
   Europe = 4
   NorthAmerica = 5
   SouthAmerica = 6
End Enum

Module Example
   Public Sub Main()
      ' Convert a Continent to a Double.
      Dim cont As Continent = Continent.NorthAmerica
      Console.WriteLine("{0:N2}", 
                        Convert.ChangeType(cont, GetType(Double)))
   
      ' Convert a Double to a Continent.
      Dim number As Double = 6.0
      Try
         Console.WriteLine("{0}", 
                           Convert.ChangeType(number, GetType(Continent)))
      Catch e As InvalidCastException
         Console.WriteLine("Cannot convert a Double to a Continent")
      End Try
      
      Console.WriteLine("{0}", CType(number, Continent))   
   End Sub
End Module
' The example displays the following output:
'    5.00
'    Cannot convert a Double to a Continent
'    SouthAmerica

Die ChangeType(Object, Type, IFormatProvider) Methode kann einen nullfähigen Typ in einen anderen Typ konvertieren. Ein anderer Typ kann jedoch nicht in einen Wert eines nullfähigen Typs konvertiert werden, auch wenn conversionType es sich um den zugrunde liegenden Typ des Typs handelt Nullable<T>. Zum Ausführen der Konvertierung können Sie einen Umwandlungsoperator (in C#) oder eine Konvertierungsfunktion (in Visual Basic) verwenden. Im folgenden Beispiel wird die Konvertierung in und von einem nullfähigen Typ veranschaulicht.

using System;

public class Example
{
   public static void Main()
   {
      int? intValue1 = 12893;
      double dValue1 = (double) Convert.ChangeType(intValue1, typeof(Double), null);
      Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
                        dValue1, dValue1.GetType().Name);

      float fValue1 = 16.3478f;
      int? intValue2 = (int) fValue1;
      Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
                        intValue2, intValue2.GetType().Name);
   }
}
// The example displays the following output:
//    12893 (Int32)--> 12893 (Double)
//    16.3478 (Single)--> 16 (Int32)

open System

let intValue1 = Nullable 12893
let dValue1 = Convert.ChangeType(intValue1, typeof<Double>, null) :?> double
printfn $"{intValue1} ({intValue1.GetType().Name})--> {dValue1} ({dValue1.GetType().Name})"

let fValue1 = 16.3478f
let intValue2 = Nullable(int fValue1)
printfn $"{fValue1} ({fValue1.GetType().Name})--> {intValue2} ({intValue2.GetType().Name})"

// The example displays the following output:
//    12893 (Int32)--> 12893 (Double)
//    16.3478 (Single)--> 16 (Int32)

Module Example
   Public Sub Main()
      Dim intValue1 As Integer? = 12893
      Dim dValue1 As Double = CType(Convert.ChangeType(intValue1, GetType(Double), Nothing), Double)
      Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
                        dValue1, dValue1.GetType().Name)
      

      Dim fValue1 As Single = 16.3478
      Dim intValue2 As Integer? = CType(fValue1, Integer) 
      Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
                        intValue2, intValue2.GetType().Name)
   End Sub
End Module
' The example displays the following output:
'       12893 (Int32)--> 12893 (Double)
'       16.3478 (Single)--> 16 (Int32)

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

Quelle:

Convert.cs

public:
 static System::Object ^ ChangeType(System::Object ^ value, TypeCode typeCode, IFormatProvider ^ provider);

public static object ChangeType(object value, TypeCode typeCode, IFormatProvider provider);

public static object? ChangeType(object? value, TypeCode typeCode, IFormatProvider? provider);

static member ChangeType : obj * TypeCode * IFormatProvider -> obj

Public Shared Function ChangeType (value As Object, typeCode As TypeCode, provider As IFormatProvider) As Object

Parameter

Gibt zurück

Ein Objekt, dessen zugrunde liegender Typ ist typeCode und dessen Wert entspricht value.

-oder-

Ein Nullverweis (Nothing in Visual Basic), wenn valuenull ist und typeCodeEmpty, String oder Object ist.

Ausnahmen

Beispiele

Im folgenden Beispiel wird ein benutzerdefinierter Formatanbieter definiert InterceptProvider , der angibt, wann seine GetFormat Methode aufgerufen wird, und gibt eine NumberFormatInfo für die fr-FR Kultur und ein DateTimeFormatInfo Objekt für die en-US Kultur zurück. Dieser Formatanbieter wird in allen Aufrufen der ChangeType(Object, TypeCode, IFormatProvider) Methode verwendet. Im Beispiel wird dann ein Array mit einem Double und einem DateTime Wert erstellt und wiederholte Aufrufe mit ChangeType(Object, TypeCode, IFormatProvider) jedem Wert und jedem Element der TypeCode Enumeration ausgeführt. Das Beispiel veranschaulicht, wann die Methode den IFormatProvider Parameter verwendet, und veranschaulicht auch die Verwendung des provider Parameters zum Ausführen von Kultursensiblen Formatierungen.

using System;
using System.Globalization;

public class InterceptProvider : IFormatProvider
{
   public object GetFormat(Type formatType)
   {
      if (formatType == typeof(NumberFormatInfo)) {
         Console.WriteLine("   Returning a fr-FR numeric format provider.");
         return new System.Globalization.CultureInfo("fr-FR").NumberFormat;
      }
      else if (formatType == typeof(DateTimeFormatInfo)) {
         Console.WriteLine("   Returning an en-US date/time format provider.");
         return new System.Globalization.CultureInfo("en-US").DateTimeFormat;
      }
      else {
         Console.WriteLine("   Requesting a format provider of {0}.", formatType.Name);
         return null;
      }
   }
}

public class Example
{
   public static void Main()
   {
      object[] values = { 103.5d, new DateTime(2010, 12, 26, 14, 34, 0) };
      IFormatProvider provider = new InterceptProvider();

      // Convert value to each of the types represented in TypeCode enum.
      foreach (object value in values)
      {
         // Iterate types in TypeCode enum.
         foreach (TypeCode enumType in ((TypeCode[]) Enum.GetValues(typeof(TypeCode))))
         {
            if (enumType == TypeCode.DBNull || enumType == TypeCode.Empty) continue;

            try {
               Console.WriteLine("{0} ({1}) --> {2} ({3}).",
                                 value, value.GetType().Name,
                                 Convert.ChangeType(value, enumType, provider),
                                 enumType.ToString());
            }
            catch (InvalidCastException) {
               Console.WriteLine("Cannot convert a {0} to a {1}",
                                 value.GetType().Name, enumType.ToString());
            }
            catch (OverflowException) {
               Console.WriteLine("Overflow: {0} is out of the range of a {1}",
                                 value, enumType.ToString());
            }
         }
         Console.WriteLine();
      }
   }
}
// The example displays the following output:
//    103.5 (Double) --> 103.5 (Object).
//    103.5 (Double) --> True (Boolean).
//    Cannot convert a Double to a Char
//    103.5 (Double) --> 104 (SByte).
//    103.5 (Double) --> 104 (Byte).
//    103.5 (Double) --> 104 (Int16).
//    103.5 (Double) --> 104 (UInt16).
//    103.5 (Double) --> 104 (Int32).
//    103.5 (Double) --> 104 (UInt32).
//    103.5 (Double) --> 104 (Int64).
//    103.5 (Double) --> 104 (UInt64).
//    103.5 (Double) --> 103.5 (Single).
//    103.5 (Double) --> 103.5 (Double).
//    103.5 (Double) --> 103.5 (Decimal).
//    Cannot convert a Double to a DateTime
//       Returning a fr-FR numeric format provider.
//    103.5 (Double) --> 103,5 (String).
//
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
//    Cannot convert a DateTime to a Boolean
//    Cannot convert a DateTime to a Char
//    Cannot convert a DateTime to a SByte
//    Cannot convert a DateTime to a Byte
//    Cannot convert a DateTime to a Int16
//    Cannot convert a DateTime to a UInt16
//    Cannot convert a DateTime to a Int32
//    Cannot convert a DateTime to a UInt32
//    Cannot convert a DateTime to a Int64
//    Cannot convert a DateTime to a UInt64
//    Cannot convert a DateTime to a Single
//    Cannot convert a DateTime to a Double
//    Cannot convert a DateTime to a Decimal
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
//       Returning an en-US date/time format provider.
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).

open System
open System.Globalization

type InterceptProvider() =
    interface IFormatProvider with
        member _.GetFormat(formatType: Type) =
            if formatType = typeof<NumberFormatInfo> then
                printfn "   Returning a fr-FR numeric format provider."
                CultureInfo("fr-FR").NumberFormat
            elif formatType = typeof<DateTimeFormatInfo> then
                printfn "   Returning an en-US date/time format provider."
                CultureInfo("en-US").DateTimeFormat
            else
                printfn $"   Requesting a format provider of {formatType.Name}."
                null

let values: obj[] = [| 103.5; DateTime(2010, 12, 26, 14, 34, 0)|]
let provider = InterceptProvider()

// Convert value to each of the types represented in TypeCode enum.
for value in values do
    // Iterate types in TypeCode enum.
    for enumType in Enum.GetValues typeof<TypeCode> :?> TypeCode[] do
        match enumType with
        | TypeCode.DBNull | TypeCode.Empty -> ()
        | _ ->
            try
                printfn $"{value} ({value.GetType().Name}) --> {Convert.ChangeType(value, enumType, provider)} ({enumType})."
            with
            | :? InvalidCastException ->
                printfn $"Cannot convert a {value.GetType().Name} to a {enumType}"
            | :? OverflowException ->
                printfn $"Overflow: {value} is out of the range of a {enumType}"
    printfn ""

// The example displays the following output:
//    103.5 (Double) --> 103.5 (Object).
//    103.5 (Double) --> True (Boolean).
//    Cannot convert a Double to a Char
//    103.5 (Double) --> 104 (SByte).
//    103.5 (Double) --> 104 (Byte).
//    103.5 (Double) --> 104 (Int16).
//    103.5 (Double) --> 104 (UInt16).
//    103.5 (Double) --> 104 (Int32).
//    103.5 (Double) --> 104 (UInt32).
//    103.5 (Double) --> 104 (Int64).
//    103.5 (Double) --> 104 (UInt64).
//    103.5 (Double) --> 103.5 (Single).
//    103.5 (Double) --> 103.5 (Double).
//    103.5 (Double) --> 103.5 (Decimal).
//    Cannot convert a Double to a DateTime
//       Returning a fr-FR numeric format provider.
//    103.5 (Double) --> 103,5 (String).
//
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
//    Cannot convert a DateTime to a Boolean
//    Cannot convert a DateTime to a Char
//    Cannot convert a DateTime to a SByte
//    Cannot convert a DateTime to a Byte
//    Cannot convert a DateTime to a Int16
//    Cannot convert a DateTime to a UInt16
//    Cannot convert a DateTime to a Int32
//    Cannot convert a DateTime to a UInt32
//    Cannot convert a DateTime to a Int64
//    Cannot convert a DateTime to a UInt64
//    Cannot convert a DateTime to a Single
//    Cannot convert a DateTime to a Double
//    Cannot convert a DateTime to a Decimal
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
//       Returning an en-US date/time format provider.
//    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).

Imports System.Globalization

Public Class InterceptProvider : Implements IFormatProvider
   Public Function GetFormat(formatType As Type) As Object _
          Implements IFormatProvider.GetFormat
      If formatType.Equals(GetType(NumberFormatInfo)) Then
         Console.WriteLine("   Returning a fr-FR numeric format provider.")
         Return New CultureInfo("fr-FR").NumberFormat
      ElseIf formatType.Equals(GetType(DateTimeFormatInfo)) Then
         Console.WriteLine("   Returning an en-US date/time format provider.")
         Return New CultureInfo("en-US").DateTimeFormat
      Else
         Console.WriteLine("   Requesting a format provider of {0}.", formatType.Name)
         Return Nothing
      End If
   End Function
End Class

Module Example
   Public Sub Main()
      Dim values() As Object = { 103.5r, #12/26/2010 2:34PM# }
      Dim provider As New InterceptProvider()
      
      ' Convert value to each of the types represented in TypeCode enum.
      For Each value As Object In values
         ' Iterate types in TypeCode enum.
         For Each enumType As TypeCode In DirectCast([Enum].GetValues(GetType(TypeCode)), TypeCode())         
            If enumType = TypeCode.DbNull Or enumType = TypeCode.Empty Then Continue For
            
            Try
               Console.WriteLine("{0} ({1}) --> {2} ({3}).", _
                                 value, value.GetType().Name, _
                                 Convert.ChangeType(value, enumType, provider), _
                                 enumType.ToString())
            Catch e As InvalidCastException
               Console.WriteLine("Cannot convert a {0} to a {1}", _
                                 value.GetType().Name, enumType.ToString())
            Catch e As OverflowException
               Console.WriteLine("Overflow: {0} is out of the range of a {1}", _
                                 value, enumType.ToString())
            End Try
         Next
         Console.WriteLine()
      Next
   End Sub
End Module
' The example displays the following output:
'    103.5 (Double) --> 103.5 (Object).
'    103.5 (Double) --> True (Boolean).
'    Cannot convert a Double to a Char
'    103.5 (Double) --> 104 (SByte).
'    103.5 (Double) --> 104 (Byte).
'    103.5 (Double) --> 104 (Int16).
'    103.5 (Double) --> 104 (UInt16).
'    103.5 (Double) --> 104 (Int32).
'    103.5 (Double) --> 104 (UInt32).
'    103.5 (Double) --> 104 (Int64).
'    103.5 (Double) --> 104 (UInt64).
'    103.5 (Double) --> 103.5 (Single).
'    103.5 (Double) --> 103.5 (Double).
'    103.5 (Double) --> 103.5 (Decimal).
'    Cannot convert a Double to a DateTime
'       Returning a fr-FR numeric format provider.
'    103.5 (Double) --> 103,5 (String).
'    
'    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
'    Cannot convert a DateTime to a Boolean
'    Cannot convert a DateTime to a Char
'    Cannot convert a DateTime to a SByte
'    Cannot convert a DateTime to a Byte
'    Cannot convert a DateTime to a Int16
'    Cannot convert a DateTime to a UInt16
'    Cannot convert a DateTime to a Int32
'    Cannot convert a DateTime to a UInt32
'    Cannot convert a DateTime to a Int64
'    Cannot convert a DateTime to a UInt64
'    Cannot convert a DateTime to a Single
'    Cannot convert a DateTime to a Double
'    Cannot convert a DateTime to a Decimal
'    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
'       Returning an en-US date/time format provider.
'    12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).

Hinweise

ChangeType(Object, TypeCode, IFormatProvider) ist eine allgemeine Konvertierungsmethode, die das durch value einen vordefinierten Typ angegebene typeCodeObjekt konvertiert. Der value Parameter kann ein Objekt eines beliebigen Typs sein. Damit die Konvertierung erfolgreich ist, value muss die IConvertible Schnittstelle implementiert werden, da die Methode einfach einen Aufruf an eine entsprechende IConvertible Methode umschließt. Die Methode erfordert auch, dass die Konvertierung valuetypeCode unterstützt wird.

Die ChangeType(Object, TypeCode, IFormatProvider) Methode unterstützt die Konvertierung von value einem benutzerdefinierten Typ nicht. Rufen Sie die ChangeType(Object, Type, IFormatProvider) Methode auf, um eine solche Konvertierung durchzuführen.

Der provider Parameter ist eine IFormatProvider Implementierung, die Formatierungsinformationen für die Konvertierung bereitstellt. Ob und wie dieser Parameter verwendet wird, hängt von der zugrunde liegenden IConvertible Implementierung ab. Wenn value es sich um einen Basisdatentyp handelt, provider wird nur für die folgenden Konvertierungen verwendet. Wenn ein nullIFormatProvider Argument an diese Methoden übergeben wird, wird das CultureInfo Objekt verwendet, das die aktuelle Kultur darstellt.

• Konvertierung von einer Zahl in eine Zeichenfolge oder von einer Zeichenfolge in eine Zahl. provider muss ein CultureInfo Objekt, ein NumberFormatInfo Objekt oder eine benutzerdefinierte IFormatProvider Implementierung sein, die ein NumberFormatInfo Objekt zurückgibt. Da die Methode die ChangeType(Object, TypeCode, IFormatProvider) Konvertierung jedoch mit dem Standardmäßigen Formatbezeichner "G" durchführt, hat der provider Parameter keine Auswirkung, wenn value oder der Zieltyp eine nicht signierte ganze Zahl ist.

• Konvertierung von einem DateTime Wert in eine Zeichenfolge oder von einer Zeichenfolge in einen DateTime Wert. provider muss ein CultureInfo Oder-Objekt DateTimeFormatInfo sein.

Wenn value es sich um einen anwendungsdefinierten Typ handelt, kann die IConvertible Implementierung den provider Parameter verwenden.