RegistryKey.SetValue Methode

Quelle:

RegistryKey.cs

public:
 void SetValue(System::String ^ name, System::Object ^ value);

public void SetValue(string? name, object value);

public void SetValue(string name, object value);

member this.SetValue : string * obj -> unit

Public Sub SetValue (name As String, value As Object)

Parameter

Ausnahmen

Beispiele

Das folgende Codebeispiel zeigt, wie die SetValue Methode den Registrierungsdatentyp bestimmt, wenn Werte festgelegt werden. Im Beispiel wird ein Testschlüssel erstellt und dem Schlüssel Werte verschiedener Datentypen hinzugefügt. Anschließend liest das Beispiel die Namen-Wert-Paare und zeigt diese mithilfe der GetValueKind Methode zur Anzeige der entsprechenden Registrierungsdatentypen an der Konsole an.

using namespace System;
using namespace Microsoft::Win32;
int main()
{
   
   // Delete and recreate the test key.
   Registry::CurrentUser->DeleteSubKey( "RegistrySetValueExample", false );
   RegistryKey ^ rk = Registry::CurrentUser->CreateSubKey( "RegistrySetValueExample" );
   
   // Create name/value pairs.
   // Numeric values that cannot be interpreted as DWord (int) values
   // are stored as strings.
   rk->SetValue( "LargeNumberValue1", (long)42 );
   rk->SetValue( "LargeNumberValue2", 42000000000 );
   rk->SetValue( "DWordValue", 42 );
   array<String^>^temp0 = {"One","Two","Three"};
   rk->SetValue( "MultipleStringValue", temp0 );
   array<Byte>^temp1 = {10,43,44,45,14,255};
   rk->SetValue( "BinaryValue", temp1 );
   
   // This overload of SetValue does not support expanding strings. Use
   // the overload that allows you to specify RegistryValueKind.
   rk->SetValue( "StringValue", "The path is %PATH%" );
   
   // Display all the name/value pairs stored in the test key, with
   // the registry data type in parentheses.
   //
   array<String^>^valueNames = rk->GetValueNames();
   System::Collections::IEnumerator^ myEnum = valueNames->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      String^ s = safe_cast<String^>(myEnum->Current);
      RegistryValueKind rvk = rk->GetValueKind( s );
      switch ( rvk )
      {
         case RegistryValueKind::MultiString:
         {
            array<String^>^values = (array<String^>^)rk->GetValue( s );
            Console::Write( "\r\n {0} ({1}) = \"{2}\"", s, rvk, values[ 0 ] );
            for ( int i = 1; i < values->Length; i++ )
            {
               Console::Write( ", \"{0}\"", values[ i ] );

            }
            Console::WriteLine();
            break;
         }
         case RegistryValueKind::Binary:
         {
            array<Byte>^bytes = (array<Byte>^)rk->GetValue( s );
            Console::Write( "\r\n {0} ({1}) = {2:X2}", s, rvk, bytes[ 0 ] );
            for ( int i = 1; i < bytes->Length; i++ )
            {
               
               // Display each byte as two hexadecimal digits.
               Console::Write( " {0:X2}", bytes[ i ] );

            }
            Console::WriteLine();
            break;
         }
         default:
            Console::WriteLine( "\r\n {0} ({1}) = {2}", s, rvk, rk->GetValue( s ) );
            break;
      }
   }
}

using System;
using Microsoft.Win32;

public class Example
{
    public static void Main()
    {
        // Delete and recreate the test key.
        Registry.CurrentUser.DeleteSubKey("RegistrySetValueExample", false);
        RegistryKey rk = Registry.CurrentUser.CreateSubKey("RegistrySetValueExample");

        // Create name/value pairs.

        // Numeric values that cannot be interpreted as DWord (int) values
        // are stored as strings.
        rk.SetValue("LargeNumberValue1", (long) 42);
        rk.SetValue("LargeNumberValue2", 42000000000);

        rk.SetValue("DWordValue", 42);
        rk.SetValue("MultipleStringValue", new string[] {"One", "Two", "Three"});
        rk.SetValue("BinaryValue", new byte[] {10, 43, 44, 45, 14, 255});

        // This overload of SetValue does not support expanding strings. Use
        // the overload that allows you to specify RegistryValueKind.
        rk.SetValue("StringValue", "The path is %PATH%");

        // Display all name/value pairs stored in the test key, with each
        // registry data type in parentheses.
        //
        string[] valueNames = rk.GetValueNames();
        foreach (string s in valueNames)
        {
            RegistryValueKind rvk = rk.GetValueKind(s);
            switch (rvk)
            {
                case RegistryValueKind.MultiString :
                    string[] values = (string[]) rk.GetValue(s);
                    Console.Write("\r\n {0} ({1}) = \"{2}\"", s, rvk, values[0]);
                    for (int i = 1; i < values.Length; i++)
                    {
                        Console.Write(", \"{0}\"", values[i]);
                    }
                    Console.WriteLine();
                    break;

                case RegistryValueKind.Binary :
                    byte[] bytes = (byte[]) rk.GetValue(s);
                    Console.Write("\r\n {0} ({1}) = {2:X2}", s, rvk, bytes[0]);
                    for (int i = 1; i < bytes.Length; i++)
                    {
                        // Display each byte as two hexadecimal digits.
                        Console.Write(" {0:X2}", bytes[i]);
                    }
                    Console.WriteLine();
                    break;

                default :
                    Console.WriteLine("\r\n {0} ({1}) = {2}", s, rvk, rk.GetValue(s));
                    break;
            }
        }
    }
}

Imports Microsoft.Win32

Public Class Example
    Public Shared Sub Main()
        ' Delete and recreate the test key.
        Registry.CurrentUser.DeleteSubKey("RegistrySetValueExample", False)
        Dim rk As RegistryKey = Registry.CurrentUser.CreateSubKey("RegistrySetValueExample")
        
        ' Create name/value pairs.
        ' Numeric values that cannot be interpreted as DWord (int) values
        ' are stored as strings.
        rk.SetValue("LargeNumberValue1", CType(42, Long))
        rk.SetValue("LargeNumberValue2", 42000000000)
        
        rk.SetValue("DWordValue", 42)
        rk.SetValue("MultipleStringValue", New String() {"One", "Two", "Three"})
        rk.SetValue("BinaryValue", New Byte() {10, 43, 44, 45, 14, 255})
        
        ' This overload of SetValue does not support expanding strings. Use
        ' the overload that allows you to specify RegistryValueKind.
        rk.SetValue("StringValue", "The path is %PATH%")
        
        ' Display all name/value pairs stored in the test key, with each
        ' registry data type in parentheses.
        '
        Dim valueNames As String() = rk.GetValueNames()
        Dim s As String
        For Each s In  valueNames
            Dim rvk As RegistryValueKind = rk.GetValueKind(s)
            Select Case rvk
                Case RegistryValueKind.MultiString
                    Dim values As String() = CType(rk.GetValue(s), String())
                    Console.Write(vbCrLf + " {0} ({1}) = ""{2}""", s, rvk, values(0))
                    Dim i As Integer
                    For i = 1 To values.Length - 1
                        Console.Write(", ""{0}""", values(i))
                    Next i
                    Console.WriteLine()
                
                Case RegistryValueKind.Binary
                    Dim bytes As Byte() = CType(rk.GetValue(s), Byte())
                    Console.Write(vbCrLf + " {0} ({1}) = {2:X2}", s, rvk, bytes(0))
                    Dim i As Integer
                    For i = 1 To bytes.Length - 1
                        ' Display each byte as two hexadecimal digits.
                        Console.Write(" {0:X2}", bytes(i))
                    Next i
                    Console.WriteLine()
                
                Case Else
                    Console.WriteLine(vbCrLf + " {0} ({1}) = {2}", s, rvk, rk.GetValue(s))
            End Select
        Next s
    End Sub
End Class

Hinweise

Da viele Werte in jedem Schlüssel in der Registrierung gespeichert werden können, müssen Sie den name Parameter verwenden, um den bestimmten Wert anzugeben, den Sie festlegen möchten.

Um Werte in einem Schlüssel festzulegen, müssen Sie den Schlüssel mit Schreibzugriff öffnen. Nachdem Sie einen Schlüssel mit Schreibzugriff geöffnet haben, können Sie jedes der Namen/Wert-Paare in diesem Schlüssel ändern.

Wenn der angegebene name Wert nicht im Schlüssel vorhanden ist, wird er erstellt, und der zugeordnete Wert wird auf value.

Diese Überladung speichert SetValue 64-Bit-Ganzzahlen als Zeichenfolgen (RegistryValueKind.String). Um 64-Bit-Zahlen als RegistryValueKind.QWord Werte zu speichern, verwenden Sie die Überladung, die SetValue(String, Object, RegistryValueKind) angibt RegistryValueKind.

Diese Überladung speichert SetValue alle Zeichenfolgenwerte als RegistryValueKind.String, auch wenn sie erweiterbare Verweise auf Umgebungsvariablen enthalten. Um Zeichenfolgenwerte als erweiterbare Zeichenfolgen zu speichern (RegistryValueKind.ExpandString), verwenden Sie die Überladung, die SetValue(String, Object, RegistryValueKind) angibt RegistryValueKind.

Numerische Typen außer 32-Bit-Ganzzahlen werden durch diese Methodenüberladung als Zeichenfolgen gespeichert. Enumerationselemente werden als Zeichenfolgen gespeichert, die die Elementnamen enthalten.

Weitere Informationen

• GetValue(String)
• GetValueKind(String)
• ValueCount

Quelle:

RegistryKey.cs

public:
 void SetValue(System::String ^ name, System::Object ^ value, Microsoft::Win32::RegistryValueKind valueKind);

public void SetValue(string? name, object value, Microsoft.Win32.RegistryValueKind valueKind);

public void SetValue(string name, object value, Microsoft.Win32.RegistryValueKind valueKind);

[System.Runtime.InteropServices.ComVisible(false)]
public void SetValue(string name, object value, Microsoft.Win32.RegistryValueKind valueKind);

member this.SetValue : string * obj * Microsoft.Win32.RegistryValueKind -> unit

[<System.Runtime.InteropServices.ComVisible(false)>]
member this.SetValue : string * obj * Microsoft.Win32.RegistryValueKind -> unit

Public Sub SetValue (name As String, value As Object, valueKind As RegistryValueKind)

Parameter

Attribute

ComVisibleAttribute

Ausnahmen

Beispiele

Im folgenden Codebeispiel wird ein Testschlüssel erstellt und die SetValue Methode verwendet, um mehrere Werte zu speichern, wobei der Registrierungsdatentyp für jeden Wert angegeben wird. Anschließend liest das Beispiel die Namen-Wert-Paare und zeigt diese mithilfe der GetValueKind Methode zur Anzeige der entsprechenden Registrierungsdatentypen an der Konsole an.

using namespace System;
using namespace Microsoft::Win32;
int main()
{
   
   // Delete and recreate the test key.
   Registry::CurrentUser->DeleteSubKey( "RegistryValueKindExample", false );
   RegistryKey ^ rk = Registry::CurrentUser->CreateSubKey( "RegistryValueKindExample" );
   
   // Create name/value pairs.
   // This overload supports QWord (long) values. 
   rk->SetValue( "QuadWordValue", 42, RegistryValueKind::QWord );
   
   // The following SetValue calls have the same effect as using the
   // SetValue overload that does not specify RegistryValueKind.
   //
   rk->SetValue( "DWordValue", 42, RegistryValueKind::DWord );
   rk->SetValue( "MultipleStringValue", gcnew array<String^>{
      "One","Two","Three"
   }, RegistryValueKind::MultiString );
   rk->SetValue( "BinaryValue", gcnew array<Byte>{
      10,43,44,45,14,255
   }, RegistryValueKind::Binary );
   rk->SetValue( "StringValue", "The path is %PATH%", RegistryValueKind::String );
   
   // This overload supports setting expandable string values. Compare
   // the output from this value with the previous string value.
   rk->SetValue( "ExpandedStringValue", "The path is %PATH%", RegistryValueKind::ExpandString );
   
   // Display all the name/value pairs stored in the test key, with the
   // registry data type in parentheses.
   //
   array<String^>^valueNames = rk->GetValueNames();
   System::Collections::IEnumerator^ myEnum = valueNames->GetEnumerator();
   while ( myEnum->MoveNext() )
   {
      String^ s = safe_cast<String^>(myEnum->Current);
      RegistryValueKind rvk = rk->GetValueKind( s );
      switch ( rvk )
      {
         case RegistryValueKind::MultiString:
         {
            array<String^>^values = (array<String^>^)rk->GetValue( s );
            Console::Write( "\r\n {0} ({1}) =", s, rvk );
            for ( int i = 0; i < values->Length; i++ )
            {
               if (i != 0) Console::Write(",");
               Console::Write( " \"{0}\"", values[ i ] );

            }
            Console::WriteLine();
            break;
         }
         case RegistryValueKind::Binary:
         {
            array<Byte>^bytes = (array<Byte>^)rk->GetValue( s );
            Console::Write( "\r\n {0} ({1}) =", s, rvk );
            for ( int i = 0; i < bytes->Length; i++ )
            {
               
               // Display each byte as two hexadecimal digits.
               Console::Write( " {0:X2}", bytes[ i ] );

            }
            Console::WriteLine();
            break;
         }
         default:
            Console::WriteLine( "\r\n {0} ({1}) = {2}", s, rvk, rk->GetValue( s ) );
            break;
      }
   }
}
/*

This code example produces the following output:
 QuadWordValue (QWord) = 42

 DWordValue (DWord) = 42

 MultipleStringValue (MultiString) =, "One", "Two", "Three"

 BinaryValue (Binary) = 0A 2B 2C 2D 0E FF

 StringValue (String) = The path is %PATH%

 ExpandedStringValue (ExpandString) = The path is C:\Program Files\Microsoft.NET\SDK\v2.0\Bin;
 [***The remainder of this output is omitted.***]

*/

using System;
using Microsoft.Win32;

public class Example
{
    public static void Main()
    {
        // Delete and recreate the test key.
        Registry.CurrentUser.DeleteSubKey("RegistryValueKindExample", false);
        RegistryKey rk = Registry.CurrentUser.CreateSubKey("RegistryValueKindExample");

        // Create name/value pairs.

        // This overload supports QWord (long) values.
        rk.SetValue("QuadWordValue", 42, RegistryValueKind.QWord);

        // The following SetValue calls have the same effect as using the
        // SetValue overload that does not specify RegistryValueKind.
        //
        rk.SetValue("DWordValue", 42, RegistryValueKind.DWord);
        rk.SetValue("MultipleStringValue", new string[] {"One", "Two", "Three"}, RegistryValueKind.MultiString);
        rk.SetValue("BinaryValue", new byte[] {10, 43, 44, 45, 14, 255}, RegistryValueKind.Binary);
        rk.SetValue("StringValue", "The path is %PATH%", RegistryValueKind.String);

        // This overload supports setting expandable string values. Compare
        // the output from this value with the previous string value.
        rk.SetValue("ExpandedStringValue", "The path is %PATH%", RegistryValueKind.ExpandString);

        // Display all name/value pairs stored in the test key, with each
        // registry data type in parentheses.
        //
        string[] valueNames = rk.GetValueNames();
        foreach (string s in valueNames)
        {
            RegistryValueKind rvk = rk.GetValueKind(s);
            switch (rvk)
            {
                case RegistryValueKind.MultiString :
                    string[] values = (string[]) rk.GetValue(s);
                    Console.Write("\r\n {0} ({1}) =", s, rvk);
                    for (int i = 0; i < values.Length; i++)
                    {
                        if (i != 0) Console.Write(",");
                        Console.Write(" \"{0}\"", values[i]);
                    }
                    Console.WriteLine();
                    break;

                case RegistryValueKind.Binary :
                    byte[] bytes = (byte[]) rk.GetValue(s);
                    Console.Write("\r\n {0} ({1}) =", s, rvk);
                    for (int i = 0; i < bytes.Length; i++)
                    {
                        // Display each byte as two hexadecimal digits.
                        Console.Write(" {0:X2}", bytes[i]);
                    }
                    Console.WriteLine();
                    break;

                default :
                    Console.WriteLine("\r\n {0} ({1}) = {2}", s, rvk, rk.GetValue(s));
                    break;
            }
        }
    }
}
/*

This code example produces the following output:
 QuadWordValue (QWord) = 42

 DWordValue (DWord) = 42

 MultipleStringValue (MultiString) =, "One", "Two", "Three"

 BinaryValue (Binary) = 0A 2B 2C 2D 0E FF

 StringValue (String) = The path is %PATH%

 ExpandedStringValue (ExpandString) = The path is C:\Program Files\Microsoft.NET\SDK\v2.0\Bin;
 [***The remainder of this output is omitted.***]

*/

Imports Microsoft.Win32

Public Class Example
    Public Shared Sub Main()
        ' Delete and recreate the test key.
        Registry.CurrentUser.DeleteSubKey("RegistryValueKindExample", False)
        Dim rk As RegistryKey = Registry.CurrentUser.CreateSubKey("RegistryValueKindExample")

        ' Create name/value pairs.
        ' This overload supports QWord (long) values.
        rk.SetValue("QuadWordValue", 42, RegistryValueKind.QWord)

        ' The following SetValue calls have the same effect as using the
        ' SetValue overload that does not specify RegistryValueKind.
        '
        rk.SetValue("DWordValue", 42, RegistryValueKind.DWord)
        rk.SetValue("MultipleStringValue", New String() {"One", "Two", "Three"}, RegistryValueKind.MultiString)
        rk.SetValue("BinaryValue", New Byte() {10, 43, 44, 45, 14, 255}, RegistryValueKind.Binary)
        rk.SetValue("StringValue", "The path is %PATH%", RegistryValueKind.String)

        ' This overload supports setting expandable string values. Compare
        ' the output from this value with the previous string value.
        rk.SetValue("ExpandedStringValue", "The path is %PATH%", RegistryValueKind.ExpandString)


        ' Display all name/value pairs stored in the test key, with each
        ' registry data type in parentheses.
        '
        Dim valueNames As String() = rk.GetValueNames()
        Dim s As String
        For Each s In  valueNames
            Dim rvk As RegistryValueKind = rk.GetValueKind(s)
            Select Case rvk
                Case RegistryValueKind.MultiString
                    Dim values As String() = CType(rk.GetValue(s), String())
                    Console.Write(vbCrLf & " {0} ({1}) =", s, rvk)
                    For i As Integer = 0 To values.Length - 1
                        If i <> 0 Then Console.Write(",")
                        Console.Write(" ""{0}""", values(i))
                    Next i
                    Console.WriteLine()

                Case RegistryValueKind.Binary
                    Dim bytes As Byte() = CType(rk.GetValue(s), Byte())
                    Console.Write(vbCrLf & " {0} ({1}) =", s, rvk)
                    For i As Integer = 0 To bytes.Length - 1
                        ' Display each byte as two hexadecimal digits.
                        Console.Write(" {0:X2}", bytes(i))
                    Next i
                    Console.WriteLine()

                Case Else
                    Console.WriteLine(vbCrLf & " {0} ({1}) = {2}", s, rvk, rk.GetValue(s))
            End Select
        Next s
    End Sub
End Class

'
'This code example produces the following output (some output is omitted):
'
' QuadWordValue (QWord) = 42
'
' DWordValue (DWord) = 42
'
' MultipleStringValue (MultiString) = "One", "Two", "Three"
'
' BinaryValue (Binary) = 0A 2B 2C 2D 0E FF
'
' StringValue (String) = The path is %PATH%
'
' ExpandedStringValue (ExpandString) = The path is C:\Program Files\Microsoft.NET\SDK\v2.0\Bin;
' [***The remainder of this output is omitted.***]

Hinweise

Da viele Werte in jedem Schlüssel in der Registrierung gespeichert werden können, müssen Sie den name Parameter verwenden, um den bestimmten Wert anzugeben, den Sie festlegen möchten.

Um Werte in einem Schlüssel festzulegen, müssen Sie den Schlüssel mit Schreibzugriff öffnen. Nachdem Sie einen Schlüssel mit Schreibzugriff geöffnet haben, können Sie jedes der Namen/Wert-Paare in diesem Schlüssel ändern.

Wenn der angegebene name Wert nicht im Schlüssel vorhanden ist, wird er erstellt, und der zugeordnete Wert wird auf value.

Wenn der Typ des angegebenen value Werts nicht mit dem angegebenen valueKindübereinstimmt und die Daten nicht konvertiert werden können, ArgumentException wird ausgelöst. Sie können z. B. eine System.Int64 als , RegistryValueKind.DWordaber nur dann speichern, wenn der Wert kleiner als der Maximalwert einer .System.Int32 Sie können einen einzelnen Zeichenfolgenwert nicht als ein RegistryValueKind.MultiString.

Weitere Informationen

• GetValueKind(String)
• GetValue(String)
• ValueCount
• RegistryValueKind