ModuleBuilder.DefineManifestResource Metod

public:
 void DefineManifestResource(System::String ^ name, System::IO::Stream ^ stream, System::Reflection::ResourceAttributes attribute);

public void DefineManifestResource(string name, System.IO.Stream stream, System.Reflection.ResourceAttributes attribute);

member this.DefineManifestResource : string * System.IO.Stream * System.Reflection.ResourceAttributes -> unit

Public Sub DefineManifestResource (name As String, stream As Stream, attribute As ResourceAttributes)

Parametrar

Undantag

Exempel

I följande exempel genereras och sparas en dynamisk sammansättning med namnet EmittedManifestResourceAssembly.exe, som innehåller en inbäddad ohanterad resurs. Exemplet skapar sammansättningen, som består av en modul, och öppnar en minnesström för att innehålla den ohanterade resursen. Koden anropar DefineManifestResource sedan metoden för att definiera resursen.

Exemplet definierar en typ i den dynamiska modulen med en Main metod och genererar MSIL för metodtexten. När brödtexten Main för metoden har genererats och typen har skapats skriver kodexemplet fem byte till strömmen som är associerad med manifestresursen. När sammansättningen sparas läggs resursen till.

När du har kört exemplet kan du köra den avgivna sammansättningen. Koden i den utgivna sammansättningens Main metod läser den inbäddade manifestresursen och skriver ut bytevärdena till konsolen. Du kan använda Ildasm.exe (IL Disassembler) för att visa informationen i sammansättningsmanifestet.

using System;
using System.Reflection;
using System.Reflection.Emit;
using System.IO;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly with one module. The module
        // name and the assembly name are the same.
        AssemblyName asmName =
            new AssemblyName("EmittedManifestResourceAssembly");
        AssemblyBuilder asmBuilder =
            AppDomain.CurrentDomain.DefineDynamicAssembly(
                asmName,
                AssemblyBuilderAccess.RunAndSave
            );
        ModuleBuilder modBuilder = asmBuilder.DefineDynamicModule(
            asmName.Name,
            asmName.Name + ".exe"
        );

        // Create a memory stream for the unmanaged resource data.
        // You can use any stream; for example, you might read the
        // unmanaged resource data from a binary file. It is not
        // necessary to put any data into the stream right now.
        MemoryStream ms = new MemoryStream(1024);

        // Define a public manifest resource with the name
        // "MyBinaryData, and associate it with the memory stream.
        modBuilder.DefineManifestResource(
            "MyBinaryData",
            ms,
            ResourceAttributes.Public
        );

        // Create a type with a public static Main method that will
        // be the entry point for the emitted assembly.
        //
        // The purpose of the Main method in this example is to read
        // the manifest resource and display it, byte by byte.
        //
        TypeBuilder tb = modBuilder.DefineType("Example");
        MethodBuilder main = tb.DefineMethod("Main",
            MethodAttributes.Public | MethodAttributes.Static
        );

        // The Main method uses the Assembly type and the Stream
        // type.
        Type asm = typeof(Assembly);
        Type str = typeof(Stream);

        // Get MethodInfo objects for the methods called by
        // Main.
        MethodInfo getEx = asm.GetMethod("GetExecutingAssembly");
        // Use the overload of GetManifestResourceStream that
        // takes one argument, a string.
        MethodInfo getMRS = asm.GetMethod(
            "GetManifestResourceStream",
            new Type[] {typeof(string)}
        );
        MethodInfo rByte = str.GetMethod("ReadByte");
        // Use the overload of WriteLine that writes an Int32.
        MethodInfo write = typeof(Console).GetMethod(
            "WriteLine",
            new Type[] {typeof(int)}
        );

        ILGenerator ilg = main.GetILGenerator();

        // Main uses two local variables: the instance of the
        // stream returned by GetManifestResourceStream, and
        // the value returned by ReadByte. The load and store
        // instructions refer to these locals by position
        // (0 and 1).
        LocalBuilder s = ilg.DeclareLocal(str);
        LocalBuilder b = ilg.DeclareLocal(typeof(int));

        // Call the static Assembly.GetExecutingAssembly() method,
        // which leaves the assembly instance on the stack. Push the
        // string name of the resource on the stack, and call the
        // GetManifestResourceStream(string) method of the assembly
        // instance.
        ilg.EmitCall(OpCodes.Call, getEx, null);
        ilg.Emit(OpCodes.Ldstr, "MyBinaryData");
        ilg.EmitCall(OpCodes.Callvirt, getMRS, null);

        // Store the Stream instance.
        ilg.Emit(OpCodes.Stloc_0);

        // Create a label, and associate it with this point
        // in the emitted code.
        Label loop = ilg.DefineLabel();
        ilg.MarkLabel(loop);

        // Load the Stream instance onto the stack, and call
        // its ReadByte method. The return value is on the
        // stack now; store it in location 1 (variable b).
        ilg.Emit(OpCodes.Ldloc_0);
        ilg.EmitCall(OpCodes.Callvirt, rByte, null);
        ilg.Emit(OpCodes.Stloc_1);

        // Load the value on the stack again, and call the
        // WriteLine method to print it.
        ilg.Emit(OpCodes.Ldloc_1);
        ilg.EmitCall(OpCodes.Call, write, null);

        // Load the value one more time; load -1 (minus one)
        // and compare the two values. If return value from
        // ReadByte was not -1, branch to the label 'loop'.
        ilg.Emit(OpCodes.Ldloc_1);
        ilg.Emit(OpCodes.Ldc_I4_M1);
        ilg.Emit(OpCodes.Ceq);
        ilg.Emit(OpCodes.Brfalse_S, loop);

        // When all the bytes in the stream have been read,
        // return. This is the end of Main.
        ilg.Emit(OpCodes.Ret);

        // Create the type "Example" in the dynamic assembly.
        tb.CreateType();

        // Because the manifest resource was added as an open
        // stream, the data can be written at any time, right up
        // until the assembly is saved. In this case, the data
        // consists of five bytes.
        ms.Write(new byte[] { 105, 36, 74, 97, 109 }, 0, 5);
        ms.SetLength(5);

        // Set the Main method as the entry point for the
        // assembly, and save the assembly. The manifest resource
        // is read from the memory stream, and appended to the
        // end of the assembly. You can open the assembly with
        // Ildasm and view the resource header for "MyBinaryData".
        asmBuilder.SetEntryPoint(main);
    asmBuilder.Save(asmName.Name + ".exe");

        Console.WriteLine("Now run EmittedManifestResourceAssembly.exe");
    }
}

/* This code example doesn't produce any output. The assembly it
   emits, EmittedManifestResourceAssembly.exe, produces the following
   output:

105
36
74
97
109
-1

 */

Imports System.Reflection
Imports System.Reflection.Emit
Imports System.IO

Public Class Example
    
    Public Shared Sub Main() 

        ' Define a dynamic assembly with one module. The module
        ' name and the assembly name are the same.
        Dim asmName As New AssemblyName("EmittedManifestResourceAssembly")
        Dim asmBuilder As AssemblyBuilder = _
            AppDomain.CurrentDomain.DefineDynamicAssembly( _
                asmName, _
                AssemblyBuilderAccess.RunAndSave _
            )
        Dim modBuilder As ModuleBuilder = _
            asmBuilder.DefineDynamicModule( _
                asmName.Name, _
                asmName.Name + ".exe" _
            )
        
        ' Create a memory stream for the unmanaged resource data.
        ' You can use any stream; for example, you might read the
        ' unmanaged resource data from a binary file. It is not
        ' necessary to put any data into the stream right now.
        Dim ms As New MemoryStream(1024)
        
        ' Define a public manifest resource with the name 
        ' "MyBinaryData, and associate it with the memory stream.
        modBuilder.DefineManifestResource( _
            "MyBinaryData", _
            ms, _
            ResourceAttributes.Public _
        )
        
        ' Create a type with a public static Main method that will
        ' be the entry point for the emitted assembly. 
        '
        ' The purpose of the Main method in this example is to read 
        ' the manifest resource and display it, byte by byte.
        '
        Dim tb As TypeBuilder = modBuilder.DefineType("Example")
        Dim main As MethodBuilder = tb.DefineMethod( _
            "Main", _
            MethodAttributes.Public Or MethodAttributes.Static _
        )
        
        ' The Main method uses the Assembly type and the Stream
        ' type. 
        Dim asm As Type = GetType([Assembly])
        Dim str As Type = GetType(Stream)
        
        ' Get MethodInfo objects for the methods called by 
        ' Main.
        Dim getEx As MethodInfo = asm.GetMethod("GetExecutingAssembly")
        ' Use the overload of GetManifestResourceStream that 
        ' takes one argument, a string.
        Dim getMRS As MethodInfo = asm.GetMethod( _
            "GetManifestResourceStream", _
            New Type() {GetType(String)} _
        )
        Dim rByte As MethodInfo = str.GetMethod("ReadByte")
        ' Use the overload of WriteLine that writes an Int32.
        Dim write As MethodInfo = GetType(Console).GetMethod( _
            "WriteLine", _
            New Type() {GetType(Integer)} _
        )
        
        Dim ilg As ILGenerator = main.GetILGenerator()
        
        ' Main uses two local variables: the instance of the
        ' stream returned by GetManifestResourceStream, and 
        ' the value returned by ReadByte. The load and store 
        ' instructions refer to these locals by position  
        ' (0 and 1).
        Dim s As LocalBuilder = ilg.DeclareLocal(str)
        Dim b As LocalBuilder = ilg.DeclareLocal(GetType(Integer))
        
        ' Call the static Assembly.GetExecutingAssembly() method,
        ' which leaves the assembly instance on the stack. Push the
        ' string name of the resource on the stack, and call the
        ' GetManifestResourceStream(string) method of the assembly
        ' instance.
        ilg.EmitCall(OpCodes.Call, getEx, Nothing)
        ilg.Emit(OpCodes.Ldstr, "MyBinaryData")
        ilg.EmitCall(OpCodes.Callvirt, getMRS, Nothing)
        
        ' Store the Stream instance.
        ilg.Emit(OpCodes.Stloc_0)
        
        ' Create a label, and associate it with this point
        ' in the emitted code.
        Dim theLoop As Label = ilg.DefineLabel()
        ilg.MarkLabel(theLoop)
        
        ' Load the Stream instance onto the stack, and call
        ' its ReadByte method. The return value is on the
        ' stack now; store it in location 1 (variable b).
        ilg.Emit(OpCodes.Ldloc_0)
        ilg.EmitCall(OpCodes.Callvirt, rByte, Nothing)
        ilg.Emit(OpCodes.Stloc_1)
        
        ' Load the value on the stack again, and call the
        ' WriteLine method to print it.
        ilg.Emit(OpCodes.Ldloc_1)
        ilg.EmitCall(OpCodes.Call, write, Nothing)
        
        ' Load the value one more time; load -1 (minus one)  
        ' and compare the two values. If return value from
        ' ReadByte was not -1, branch to the label 'loop'.
        ilg.Emit(OpCodes.Ldloc_1)
        ilg.Emit(OpCodes.Ldc_I4_M1)
        ilg.Emit(OpCodes.Ceq)
        ilg.Emit(OpCodes.Brfalse_S, theLoop)
        
        ' When all the bytes in the stream have been read,
        ' return. This is the end of Main.
        ilg.Emit(OpCodes.Ret)
        
        ' Create the type "Example" in the dynamic assembly.
        tb.CreateType()
        
        ' Because the manifest resource was added as an open
        ' stream, the data can be written at any time, right up
        ' until the assembly is saved. In this case, the data
        ' consists of five bytes.
        ms.Write(New Byte() {105, 36, 74, 97, 109}, 0, 5)
        ms.SetLength(5)
        
        ' Set the Main method as the entry point for the 
        ' assembly, and save the assembly. The manifest resource
        ' is read from the memory stream, and appended to the
        ' end of the assembly. You can open the assembly with
        ' Ildasm and view the resource header for "MyBinaryData".
        asmBuilder.SetEntryPoint(main)
        asmBuilder.Save(asmName.Name + ".exe")
        
        Console.WriteLine("Now run EmittedManifestResourceAssembly.exe")
    
    End Sub 
End Class 

' This code example doesn't produce any output. The assembly it
' emits, EmittedManifestResourceAssembly.exe, produces the following
' output:
'
'105
'36
'74
'97
'109
'-1
'

Kommentarer

Resurser som registreras i sammansättningsmanifestet kan vara hanterade resurser eller manifestresurs-BLOB:er, och var och en av dessa kan ingå i sammansättningen antingen genom att länka eller bädda in. Alla fyra scenarierna stöds för dynamiska sammansättningar.

• Med den här metoden kan du bädda in en manifestresurs-BLOB i en dynamisk sammansättning.

• Om du vill bädda in en hanterad resurs i manifestmodulen för en dynamisk sammansättning eller i en satellitmodul använder du ModuleBuilder.DefineResource metoden för att hämta en resursskrivare och använder ResourceWriter.AddResource metoden för att lägga till resursen.

• Om du vill länka en hanterad resurs till en dynamisk sammansättning använder du AssemblyBuilder.DefineResource metoden för att hämta en resursskrivare och använder ResourceWriter.AddResource metoden för att lägga till den länkade resursen.

• Om du vill länka en manifestresurs-BLOB till en dynamisk sammansättning använder du AssemblyBuilder.AddResourceFile metoden för att lägga till den länkade resursen.

Dessutom kan en enskild Win32-resurs kopplas till en sammansättning med hjälp AssemblyBuilder.DefineUnmanagedResource av metoden eller ModuleBuilder.DefineUnmanagedResource metoden. Den här resursen visas inte i sammansättningsmanifestet.

Se även

• DefineResource(String, String)
• DefineResource(String, String, String, ResourceAttributes)
• AddResource(String, String)
• AddResourceFile(String, String)
• DefineUnmanagedResource(String)
• DefineUnmanagedResource(Byte[])