NDISTest 6.5 - [1 Machine] - SRIOVBasicVerification

This test does the basic verification of the SRI-OV functionality on the miniport adapter in the presence of vSwitch. This is a single machine job and it needs additional configuration for execution.

• The machine used for testing should have the Hyper-V server role installed. Also, make sure that you select and install the Hyper-V Module PowerShell management tools during installation.

• Make sure you that copy a Windows 8 VHD (that you want to use for creating the VM) to the local folder (for example: C:\VHDs) on the machine under test.

Now, you're ready to run the SRIOVBasicVerification test.

When you select the job and click 'Run Selected', you will get a pop-up like the image shown below for entering additional parameters:

The values that the job expects are as follows:

• VMName - You can give any name for the virtual machine. Please make sure that a virtual machine with the same name does not exist on the test machine already.

• VHDName - Enter the name of the VHD that you copied to the test machine earlier. For example: Mastervhd.vhd. This vhd will not be deleted from the test machine.

• VHDPath - Enter the path to the VHD location on the test machine (not on the controller). For example: C:\VHDs.

Test details

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

• Device.Network additional documentation
• System.Server additional documentation

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting LAN Testing.

More information

Parameters