Hinweis
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, sich anzumelden oder das Verzeichnis zu wechseln.
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, das Verzeichnis zu wechseln.
Applies To: Windows Server 2008
A server running Routing and Remote Access provides two different types of remote access connectivity: virtual private networking (VPN) and dial-up networking. VPN is the creation of secured, point-to-point connections across a private network or a public network, such as the Internet. A VPN client uses special TCP/IP-based protocols called tunneling protocols to make a virtual call to a virtual port on a VPN server. In dial-up networking, a remote access client makes a nonpermanent, dial-up connection to a physical port on a remote access server by using the service of a telecommunications provider, such as analog phone or ISDN. In contrast to dial-up networking, VPN is always a logical, indirect connection between the VPN client and the VPN server over a public network, such as the Internet.
Events
| Event ID | Source | Message |
|---|---|---|
RemoteAccess |
Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected. | |
RemoteAccess |
The user: %1 has connected and failed to authenticate on port: %2. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time. | |
RemoteAccess |
The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated. | |
RemoteAccess |
The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2. | |
RemoteAccess |
The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected. | |
RemoteAccess |
The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4 | |
RemoteAccess |
The user: %1 has connected and failed to authenticate with a third party on port: %2. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the following internal authentication error occurred in the third-party security module: %2 | |
RemoteAccess |
Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected. | |
RemoteAccess |
The user was autheticated as: %1 by the third-party security host module but was authenticated as: %2 by remote access security. The user has been disconnected. | |
RemoteAccess |
Unable to open the port: %1 for use. %2 | |
RemoteAccess |
Cannot recognize initial frame received on port: %1. The line has been disconnected. | |
RemoteAccess |
An error occurred in the Point-to-Point Protocol (PPP) module on port: %1 while trying to initiate a connection. %2 | |
RemoteAccess |
The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3 | |
RemoteAccess |
The user: %1 has been disconnected on port: %2. %3 | |
RemoteAccess |
CoID=%1: The user %2 dialed a connection named %3 which has terminated. The reason code returned on termination is %4. | |
RemoteAccess |
CoID=%1: The user %2 dialed a connection named %3 which has failed. The error code returned on failure is %4. | |
RemoteAccess |
Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected. | |
RemoteAccess |
CoID=%1: The user connected to port %2 has been disconnected due to inactivity. | |
RemoteAccess |
CoID=%1: The user %2 has connected and failed to authenticate on port %3. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time. | |
RemoteAccess |
The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated. | |
RemoteAccess |
The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2. | |
RemoteAccess |
The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected. | |
RemoteAccess |
The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4 | |
RemoteAccess |
Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected. | |
RemoteAccess |
A user was unable to connect on port: %1. No more connections can be made to this remote computer because the computer has exceeded its client license limit. | |
RemoteAccess |
Cannot recognize initial frame received on port: %1. The line has been disconnected. | |
RemoteAccess |
The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3 | |
RemoteAccess |
The user: %1 has been disconnected on port: %2. %3 | |
RemoteAccess |
CoId=%1: Layer=%2: SubLayer=%3: The connection attempt failed on port: %4 because of the authentication protocol selected. Check to see if the authentication protocol is supported in the operating systems at the client and server ends of the connection |