Hinweis
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, sich anzumelden oder das Verzeichnis zu wechseln.
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, das Verzeichnis zu wechseln.
Applies To: Windows Server 2008
The Routing and Remote Access service has determined that RRAS audits generated an audit entry when a system event was executed successfully. These events confirm successful Routing and Remote Access operations.
Events
| Event ID | Source | Message |
|---|---|---|
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. | |
RemoteAccess |
The user: %1 connected on port: %2 on: %3 at: %4 and disconnected on: %5 at: %6. The user was active for: %7 minutes, %8 seconds. %9 bytes were sent and %10 bytes were received. The port speed was: %11. The reason for disconnecting was: %12. | |
RemoteAccess |
The user: %1 on port: %2 was called back at the number: %3. | |
RemoteAccess |
The remote access server acquired IP address: %1 | |
RemoteAccess |
The port: %1 has been disconnected due to inactivity. | |
RemoteAccess |
The port: %1 has been disconnected because the user reached the maximum connect time allowed by the administrator. | |
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. Data sent and received over this link is encrypted. | |
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. Data sent and received over this link is strongly encrypted. | |
RemoteAccess |
The user: %1 has successfully established a connection to: %2 using the device: %3. | |
RemoteAccess |
The connection to: %1 made by user: %2 using device: %3 was disconnected. | |
RemoteAccess |
The user: %1 successfully established a connection to: %2 using the device: %3. This connection happened automatically because the bandwidth utilization was high. | |
RemoteAccess |
The remote access server established a connection to: %1 for the user: %2 using the device: %3. This connection happened automatically because the bandwidth utilization was high. | |
RemoteAccess |
The connection to: %1 made by user: %2 using device: %3 was disconnected. This disconnection happened automatically because the bandwidth utilization was low. | |
RemoteAccess |
A link in the connection to: %1 made by user: %2 should be disconnected. The bandwidth utilization is too low. | |
RemoteAccess |
Interface: %1 is now reachable. | |
RemoteAccess |
Because no certificate has been configured for clients dialing in with EAP-TLS, a default certificate is being sent to user: %1. Go to the user's remote access policy and configure the Extensible Authentication Protocol (EAP). | |
RemoteAccess |
The user: %1 connected on port: %2 on: %3 at: %4 and disconnected on: %5 at: %6. The user was active for: %7 minutes %8 seconds. %9 bytes were sent and %10 bytes were received. The reason for disconnecting was: %11. | |
RemoteAccess |
The user: %1 connected on port: %2 has been assigned address: %3 | |
RemoteAccess |
The user with IP address: %1 has disconnected. | |
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. | |
RemoteAccess |
The user: %1 connected on port: %2 on: %3 at: %4 and disconnected on: %5 at: %6. The user was active for: %7 minutes, %8 seconds. %9 bytes were sent and %10 bytes were received. The port speed was: %11. The reason for disconnecting was: %12. | |
RemoteAccess |
The user: %1 on port: %2 was called back at the number: %3. | |
RemoteAccess |
The port: %1 has been disconnected due to inactivity. | |
RemoteAccess |
The port: %1 has been disconnected because the user reached the maximum connect time allowed by the administrator. | |
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. Data sent and received over this link is encrypted. | |
RemoteAccess |
The user: %1 has connected and has been successfully authenticated on port: %2. Data sent and received over this link is strongly encrypted. | |
RemoteAccess |
The user: %1 has successfully established a connection to: %2 using the device: %3. | |
RemoteAccess |
The connection to: %1 made by user: %2 using device: %3 was disconnected. | |
RemoteAccess |
The user: %1 connected on port: %2 on: %3 at: %4 and disconnected on: %5 at: %6. The user was active for: %7 minutes %8 seconds. %9 bytes were sent and %10 bytes were received. The reason for disconnecting was: %11. | |
RemoteAccess |
The user: %1 connected on port: %2 has been assigned address: %3 | |
RemoteAccess |
The user with IP address: %1 has disconnected. |